Exhibitor products

In addition to proven reliability, this series includes fixed-voltage devices (with an extended setting range of e.g. 18 to 30 Vdc) and analogue programmable devices as built-in units (up to 1500 W) or as full plug-in units in a 19’ system (3000 W). This series is characterised by the following features: - Precise output voltage due to possible sense lead operation - Parallel switchable with symmetrical load sharing (loadshare) - Integrated power failure signalling (PFS) and overtemperature signalling - Optional functional safety in accordance with EN/IEC 62061 SIL 2 and EN - ISO 13849-1 , Performance level PL-d ‘Machinery Directive’ The analogue programming of voltage and current is carried out via an external control voltage of 0 to 5 V or via external resistors. In addition, you can read out the current output voltage and current with a 0 to 5 V voltage via a monitor voltage (provided by the power supply). Your advantages: - Sturdy anodised aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating - Integrated power limitation The following types are available in this series: - EXWP (built-in mechanics 800 W) - EXW2 (built-in mechanics 1500 W) - EXWUIP (built-in mechanics 800 W) - EXWUI2 (built-in mechanism 1500 W) All types can be ordered as ‘wall mounting’ or ‘DIN rail mounting’.

UMG 96-EL: Precise data for precise decisions

In addition to proven reliability, you will find a wide range of integrated functions in this series: - Functional safety in accordance with EN/IEC 62061 SIL 2 and EN - ISO 13849-1, Performance Level PL-d “Machinery Directive” - Voltage, current and power control with programmable setpoints and read-back actual values actual values - With integrated programmable e-load (discharge circuit or current sink) for rapid discharge of the output or conversion of the regenerative energy during motor testing in braking mode. - 12-bit resolution - Programmable monitoring of the controller status for voltage, current and power with message or independent safety shutdown - Additional functions on I/O interface for integration into control systems (e.g. SPS) - Possibility of sequential operation (test sequences can be saved and executed automatically) - All parameters (e.g. voltage, current, power, limits, ...) can be stored in 50 non-volatile memory banks and memory banks and can be recalled again - Optional FAST version for shorter programming times (factor 10 to 30) compared to the standard version Your choice of digital interfaces (isolated): - USB (standard) - RS232 (2x RJ45, standard) - CANopen (2x RJ45, standard) - LAN (Ethernet, optional) - EtherCAT (2x Rj45, optional) - Analog (D-Sub, optional) Your advantages: - All digital standard power supplies from Kniel (including Fast variants) operate from the customer's point of view with identical firmware - Sturdy anodized aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating The following types are available in this series: - EXWUID (built-in 400 W to 1200 W) - VE1PUID (19” design 1500 W) - VE3PUID (19” design 3000 W) The EXWUID type can be ordered as “wall mounting” or “DIN rail mounting”.

The latest series of power supplies from Kniel is called Energy Digital Basic. In addition to proven reliability, this series includes all the necessary functions required for a digitally controllable power supply: - Voltage, current and power regulation with programmable setpoints and read-back actual values - 16-bit resolution - Programmable monitoring of the controller status for voltage, current and power with message or independent safety shutdown - All parameters (e.g. voltage, current, power, limits, ...) can be saved in 10 non-volatile memory banks and memory banks and can be recalled again - The delivery status is set to Remote. This facilitates configuration in your your system and the potential replacement of components Your choice of digital interfaces (isolated): - USB (standard) - LAN (Ethernet, optional) - EtherCAT (2x Rj45, optional) Your advantages: - All digital standard power supplies from Kniel (including Fast variants) work with identical firmware from the customer's point of view. If you are already using digital power supplies from Kniel you can expect a reduced but identical command set and therefore a reduced range of functions reduced to the relevant functions. - Sturdy anodized aluminium housing and conductively connected housing parts - Thermal overload protection - Temperature-controlled fan - Operating temperature range between -20 °C and +50 °C, without derating The following types are available in this series: - ELUID (linear regulated power supply up to 100 W) - EXWUID 200 W (switching power supply up to 200 W) Both types are available in the “wall mounting” or “DIN rail mounting” versions.

Energy management means the continuous monitoring, storage and evaluation of energy measurement data, thereby increasing the transparency of energy consumption and energy costs at all measurement levels. Only with a detailed overview of the energy consumers, the use of energy can be designed in a demandoriented and efficient manner and thus, for example, offering optimisation potentials. The energy meter RL 9405 of the VARIMETER PRO series is used to measure electrical parameters and energy consumption in 3-phase mains with neutral conductor. Voltages and currents are measured and evaluated continuously. A separate auxiliary voltage is not required. The device provides up to 50 characteristic values of the energy supply and that with a compact width of only 35 mm. The RL 9405 determines all energy consumptions and enables a breakdown by cause. The energy meter RL 9405 is predestined for use in manufacturing processes and IT data centres, to detect energy saving potentials and is especially suitable for the fulfilment of energy audits (DIN EN 16247-1) or energy management (ISO 50001). The galvanically separated Modbus RTU interface offers flexible options for processing information directly via a gateway or a higher-level control system (PLC) and passing it on via standardised interfaces.

Smart retrofit solutions for energy monitoring

Holistic solutions for your energy and climate goals – with EnergyPartner+. From the initial consultation and planning to a successful energy concept, we guide you every step of the way: 1. Analysis of your current energy consumption and CO₂ emissions 2. Strategy development – ​​customized, realistic, and feasible 3. Planning & implementation – professional and solution-oriented 4. Ongoing support – even after project completion. The "+" stands for more than just energy: It represents intelligent, future-proof solutions for efficiency, cost-effectiveness, and climate protection.

In our semi-automated continuous coating system from Wurster Oberflächentechnik, we can degrease, phosphate and powder coat housings and sheet metal parts with dimensions of up to 3000 x 1200 x 800 (W x H x D). Parts exceeding these dimensions are coated in collaboration with partners where necessary. We also usually apply the primer as a powder coating. Powder coating offers a number of advantages over wet painting. Powder coating is more durable and cost-effective to apply. The solvent-free application is also environmentally friendly. Key data at a glance Average turnaround time 3 hours Max. component load 120 kg Max. dimensions H/W/D 1200x3000x800 Max. material thickness 20 mm Paint booths 1 booth for standard colours RAL7032/35 with automatic and manual spray guns 1 booth for coloured paints with automatic and manual spray guns Pre-treatment (4-zone) Degreasing, rinsing, VE rinsing, iron phosphating Connected condensate dryer Curing oven up to 200°C Powder types: Epoxy resin powder (good rust protection, chemical-resistant) Polyester-epoxy resin powder (hybrid powder) Polyester powder (UV-resistant, for exterior use) Polyurethane powder Colours as required: from RAL, Sikkens, NCS, Munzel and many more Gloss level: Glossy Satin Matt to very matt Texture: Coarse texture Medium texture (fine texture) Smooth To ensure consistent quality control, cross-section analysis, coating thickness measurement, punch testing and visual inspection are carried out regularly.

EOS printers unite the features known of solid label printers with highest ease of operation. Mobile printing: in production, warehousing or agriculture, wherever labels are required and access to electricity is missing.

Ensure with electronic protection devices reliable protection of standard components of industrial automation applications. With a protected application, each load is protected and operated individually to enable easy and fast troubleshooting. The devices feature the lowest power loss on the market and an impressive performance in severe conditions. From 0.5 to 12 A in a 25mm device, seamless expandability, front-top wiring, and easy integration with most ABB devices for a consistent and affordable portfolio. Main benefits: - Compact size to reduce required space in cabinets - Energy efficient: lowest power loss - Save time with push-in terminals and easy expansion with jumpers  - Certified product for global use (UL 508 listed)

Eplan Cable proD is a solution for quick and easy cabling of machines. The software digitises the corresponding designs and provides the information required for production and assembly. This means that prefabricated cables can also be used. Cable planning based on the plug & play principle Precision is required when constructing machines – all the way through to the final steps: if the cables don’t have the correct lengths or have been incorrectly routed, it is not uncommon for entire commissioning processes to have to be postponed. Eplan has therefore dedicated an entire software solution for planning the corresponding machine cabling: Eplan Cable proD. This also makes it easy to order prefabricated cables. Time-consuming trimming and offcuts are now a thing of the past.

Eplan Copilot is Eplan’s first AI solution. It is integrated into the Eplan Platform and acts as a connecting element between the individual systems. It enables users to formulate tasks in natural language and thus operate the software intuitively. This means you no longer need to be familiar with every function – the AI simply makes them accessible. “We want to give users the best possible support in using and mastering our software for their tasks,” says Sebastian Seitz, CEO at Eplan.

The ECAD Standard for Your Engineering – More Than Just Drawing Schematics Eplan Electric P8 is a consistent, integrated and fast engineering system for you to plan and design the electrical engineering for machines and plant systems. The software supports a wide variety of engineering methods: from manual creation through to standardised and template-based approaches. The project data, once entered into the schematic, become the foundation for the automated completion of machine and plant system documentation. In short, Eplan Electric P8 offers you much more than “just” drawing schematics and circuit diagrams.

Integrated Design in 2D and 3D for Panel Building and Switchgear System Engineering Eplan Pro Panel gives you a stable foundation for automating and industrialising your panel building. It enables 3D design and construction of control cabinets, switchgear systems and power distribution systems for energy distribution. Eplan Pro Panel provides you an integrated solution for control cabinet design.

Intuitive Installation of Mechanical and Electrotechnical Components Eplan Smart Mounting simplifies the manual installation of mechanical and electrotechnical components in control cabinet manufacturing. Precise work instructions, combined with a 3D visualisation, ensure efficient control cabinet construction. The browser-based software can be used directly at a workstation in workshops and production facilities – and all of it only requires a brief training.