Exhibitor products

The data logging unit determines load data on vehicles while they are in use in order to be able to optimize the parts, components or units used in the vehicles. The customer can then evaluate the data using his software solution. - Development time including prototyping: approx. 9 months - Series production of the complete control unit since 2019 with approx. 500 pieces p.a.

Ihre Lösung – so individuell wie Ihr Projekt Das DATANET MODUL® ist keine Standardlösung von der Stange. Ab sofort stehen Ihnen zwei flexible Wege zur Verfügung: 1. Komplettlösung aus einer Hand – fertig konfiguriert von YELLO Netcom Sie liefern uns Ihre Anforderungen – wir übernehmen die Planung, Konfiguration und Fertigung Ihrer individuellen Netzwerkbox. Die Installation vor Ort kann optional durch externe Partner erfolgen, die wir bei Bedarf vermitteln. 2. Ausstattungspakete für Ihre Container-Lösung Sie möchten Ihre Container oder modulare Gebäude eigenständig ausrüsten? Wir stellen alle erforderlichen Netzwerk- und Stromkomponenten individuell für Sie zusammen – exakt nach Ihren technischen Vorgaben. YELLO Netcom liefert diese Ausstattung direkt an den Verwendungsort und unterstützt Sie bei der Planung, Koordination und – falls gewünscht – bei der Auswahl geeigneter Dienstleister für die Installation.

Monitoring of DC voltage networks The possibility of storing direct current from renewable energies and utilising it in industrial production is leading to the spread of DC voltage networks. The DC voltage relay UG 9431 from the VARIMETER series monitors these for overvoltages, undervoltages and exceeding of voltage ranges. With its large measuring range of DC 20 - 1000 V, the voltage relay UG 9431 can be used in a wide variety of industrial applications. - 2 parameterisable relay outputs - Simple parameterisation, monitoring and diagnostics via Modbus RTU - Optimised system operation thanks to preventive maintenance

Brushed DC motors can be used universally due to their simple structure. Therefore, there are hardly any applications in which DC motors do not play a certain role. Advantages of our DC motors: • Exact adjustment to the correct operating point • Cost-effective design • High efficiency and power density • Ideal for battery operation • Simple control via DC voltage and PWM • Available from 4 mm diameter and in flat designs • Gear boxes in many versions Our DC motors are available in different motor designs and with customer-specific attachments • Connections (connectors, soldering pads, metal contacs, ...) • Encoders (optical, magnetical, Hall-sensors, magnet on shaft) • Gears and bearings • Coil (iron anchor, bell runner, flat runner) • Commutation (metal or carbon) • Output (D-cut, double D-cut, pinion, round shaft) and customized adaptation (winding, speed and torque, insulation class, service life, mechanical interfaces, ...).

Battery-buffered UPS systems offer many advantages and can be used in many different ways: - Possible operation modes: Stand-by-parallel operation, buffer battery system - Ready for connection - Master-Slave-operation to increase power - Redundant-operation possible - Battery management by micro-controller - Shut-down-input referring to ground - Boost charge can be activated by control input referring to ground - Detection of battery wire break and battery test

The DC-Buffer Module C-TEC works with Ultra-Capacitors as an Energy Storage inside the Unit. In Case of an interruption of the DC-Supply, the Energy of the Ultra-Capacitors will be released. The load from the Buffer Module, until it is discharged. The Back-Up time depends on the state of charge of the capacitors and the discharge current. Highlights: - Compact design, assembled in one housing - Maintenance-free - Deep discharge protection, thus unlimited storage period - Operation under extreme temperatures possible (extremely high, extremely low) - No gas generation, installation in hermetic seated housing possible - Fast availability because of short recharge time after discharging

DC/DC converters 20 W to 240 W - 19” mechanics Kniel DC/DC converters supply your systems with reliable and continuous power. Our DC/DC converters can be operated on DC supply voltages with high ripple; additional filtering is not necessary. In addition to standard voltages (5, 12, 15, 24, 48Vdc), we can also manufacture individual voltages specifically for your application. This series is characterized by the following features: - Wide operating temperature range from -25 °C to +70 °C, without derating - Up to 20 % more power for dynamic loads thanks to Power Boost, or up to 45 °C Ambient temperature as continuous output (values in brackets in the data sheet) - General electrical isolation between input and output for universal use - Efficiency up to 90 % - Optionally also available with PFS or VME signal (failure messages) - Output voltages are electrically isolated and freely switchable, even with multiple devices (e.g +15Vdc and -15Vdc from one device, but +15Vdc and +15Vdc also possible) - Practical control characteristics - Low output ripple due to double filter - High mechanical load capacity (oscillation/shock) due to robust mechanical design with special aluminum profiles - All power supplies are adapted to the thermal conditions of the compact 19” slide-in technology

Using plasma generated by microwaves, results of incomparable quality are achieved in a dry chemical etching process

Decentralized automation system – zero cabinet Into the field, decentralize, modularize, combine technologies, act more energy efficiently, reduce and simplify complexity and find smart solutions. This is what Vario-X achieves: 100 percent decentralized automation without control cabinets. The Vario-X system solves increasingly complex production challenges. Vario-X is a modular system with solutions for every machine need imagined down to the smallest detail. You can plan and expand your system according to all the rules of the art – flexible, scalable, machine mountable and compact. Our decentralized system eliminates the need for time-consuming installation. Set-up times and error sources are eliminated. Service and down-times are adjusted to your production cycles through predictive maintenance. Sounds complex, but Murrelektronik makes it quite simple! The future of automation is cabinetless.

Switch to the Original.

Efficient control cabinet dehumidification for reliable condensation protection and maximum operational safety.

Compact control cabinet dehumidifier for reducing humidity and minimizing condensation and corrosion.

Many of our customers in the field of measurement, control and regulation technology are faced with the challenge of networking their numerous devices and system components, collecting data, acting more effectively and making better decisions. At DELTEC electronics, projects in the areas of Smart Maintenance, Smart Energy, Smart City and Smart Medical are developed and manufactured for established industrial companies as well as for innovative start-ups. Our focus is on data collection, edge computing and communication. We offer advice on ideas and business cases, develop individual hardware or recommend standard products.

Pneumatic processes are standard practice in all sectors of industry. They also use a lot of energy, not least because compressed air is often wasted for various reasons. To remedy this situation and allow operators to benefit from other advantages, SMC has developed a new digital module for compressed air management with the Air Management System in ¼ to 1-inch connection sizes. Combining the regulator, hub and shut-off valve lets operators do more than simply monitor the pressure, temperature and flow of the air feed. By defining base parameters, operators can also make use of predictive maintenance and condition-based monitoring, ultimately reducing compressed air consumption by up to 62%. Compressed air is one of the most common energy sources in industry, and also one of the most expensive. That’s because only around 10% of the electricity used by an air compressor is supplied to the compressed air network in the form of effective output. This turns every cubic metre into a valuable asset and waste needs to be avoided. With this in mind, automation specialist SMC developed the new Air Management System in ¼ to 1-inch connection sizes. Above all, it helps to reduce compressed air consumption by up to 62%. In this respect, the digital module particularly impresses with its monitoring of pressure, temperature and flow as well as the programmable automatic pressure reduction and shut-off. PROFINET or EtherNet/IP can be used to connect to higher-level controllers. The integrated OPC UA server also supports operation entirely without a PLC while still benefiting from the Air Management System. What’s more, additional systems can be wirelessly integrated into the solution. This makes it quick to install and the system can be easily retrofitted, even in brownfield plants.