Exhibitor products

It is often the little things that make everyday work easier. Lo and behold, here comes the multitool - in this form exclusively available at ipf electronic. The small multitool AY000154 fits in every trouser pocket and integrates a total of eight tools, including six Allen keys for fastening the sensors from ipf electronic for querying pneumatic cylinders. Especially the Allen key with 2.5mm is mostly missing in comparable multitools and also the key with 0.7mm is usually not available in most tool sets. If, for example, the potentiometer of an optical sensor needs to be adjusted, it is not necessary to look for a suitable screwdriver, because the multitool also contains two suitable solutions.

The UMG 801 modular power analyzer provides a variety of communication interfaces and protocols (e.g. OPC UA) for standardized and manufacturer-independent data transmission to higher-level systems, thus eliminating the need for costly integration. The UMG 801 covers all the needs of an energy management system (pursuant to ISO 50001) too. It provides transparency with respect to energy consumption and energy costs at all measurement levels. Critical deviations in power quality and residual currents (RCM) can thus be detected. The UMG 801 can be expanded using stackable, easy-to-integrate modules with up to 92 current measuring channels and up to 144 digital inputs. The easy-to-connect plug-in concept (Plug & Play) reduces wiring work and an integrated bus system connects the basic device with the modules. Seamless power supply and data transmission are thus guaranteed.

From power quality analysis to energy monitoring, from residual current to temperature monitoring, the UMG 96-PQ-L-LP offers the right functions for every application. Avoid system failures by clearly displaying the entire power quality of a measurement level at low cost with the UMG 96-PQ-L-LP. Short of space in the switchboard cabinet? Thanks to the low-power current inputs, classic current transformers can be replaced with smaller and less expensive current transformers. Since low-power transformers operate in the millivolt range on the secondary side, no converter disconnect terminal is required. Passive Rogowski coils can also be used for simple retrofit solutions. In this case, the measurement device serves as the measurement transducer, saving money and essential space in the switchboard cabinet. The UMG 96-PQ-L-LP modular network analyzer can measure full-wave events and present and analyze them directly in the network display. It also comes with a large memory, which, thanks to a special data compression method, ensures several years’ worth of storage. Memory partitioning preserves the long storage time for current, power and work even in combination with high-resolution power quality measurement. All values can be conveniently displayed and graphically represented on the color graphic display. What’s more, the UMG 96-PQ-L-LP offers plug-in modules for functional enhancements and 50 comparators that can be configured individually or via predefined comparator profiles.

Safe contact extension - Now with UL approval The extension module RK 6929 from the SAFEMASTER series offers up to two separately controllable forcibly guided relays in a compact enclosure with a width of only 17.5 mm and is used to decouple the control and power levels as well as for contact reinforcement. As an output extension for signals from safety control systems (OSSD), the RK 6929 switches actuators reliably and potential-free. The extension module can be used in mechanical and plant engineering as well as in applications for firing systems in accordance with EN 50156-1. For use in the application area of EN 61010-1, the clearances and creepage distances between mains circuits and touchable voltages as well as between mains circuits are dimensioned according to double insulation. - Space-saving in the switch cabinet due to a width of only 17.5 mm - Control also with safety-related semiconductor outputs - With UL approval available - Interface type C class 1 (CB24I)

Flexible extension of safety circuits The extension module XF 6929 from the SAFEMASTER series enables reliable and flexible extension of safety circuits. With front-side contact via cage clamp terminals and a wide voltage range of DC 8 - 36 V, it offers high installation convenience and versatile application options. Safety switching devices with semiconductor outputs, such as BWS, emergency stop or OSSD systems, can be expanded with potential-free relay contacts using the XF 6929. The module has up to two separately controllable, forcibly guided relay circuits in a compact 17.5 mm housing and is ideal for applications in mechanical and plant engineering. - Wide voltage range from DC 8 ... 36 V - Space-saving in the switch cabinet due to a width of only 17.5 mm - Suitable for combustion plants in accordance with EN 50156-1

External camera for expanded inspection perspectives Expand your system with an additional, high-resolution 20-megapixel camera. Its flexible positioning allows for supplementary image inspections—for example, on the sides of your components—ensuring more comprehensive quality control. The camera can be seamlessly integrated into existing processes and is an ideal complement to the top view.

Rotary Encoder – Incremental Feedback Devices for Motion Control Oriental Motor’s Rotary Encoder series includes ultra-compact, high-resolution incremental encoders designed for tight-space installations. Technical Features Housing Types: • Round shaft models in Ø30 mm or Ø40 mm • Hollow shaft models in Ø30 mm or Ø40 mm Resolution Options: 14 options ranging from 100 to 4,000 P/R Output Formats: Line driver, voltage output, or open-collector (5–24 VDC) Physical Specs: Ø30 mm or Ø40 mm, depth 22 mm, weight ~33 g (round-shaft), ~38 g (hollow‑shaft) Signal Outputs: A, B, Z phases for precise position and speed detection IP65 version: round shaft with Ø40 mm, available as Line Driver or Open Collector type Benefits & Applications • Enables detection of rotation differences (belt slippage, pulley deflection) and supports predictive maintenance systems • Very small footprint; ideal for retrofit or space-constrained designs. Mounting adapter (PEF2) simplifies installation on Ø30 mm shafts • Easy mechanical alignment of Z-phase output—Z-signal at 180° from connector orientation

Composed of a powerful compact controller and a high-resolution camera, the intuitive EYE+ smart control system integrates AI-based algorithms to optimize the performance of your Asycube flexible feeder. EYE+ manages all components of your application including the robot via the EYE+ Studio web-based interface. Thanks to a large number of ready-to-use plugins for robots and feldbuses such as EtherNet/IP, EtherCAT and PROFINET, you can easily integrate EYE+ into any automation machine.

Robot guidance made simple and efficient EYE+ XTD brings a new level of flexibility to robotic part localization. Powered by advanced AI algorithms, it provides accurate part coordinates—whether parts are placed on conveyors, in thermoformed trays, or on complex surfaces. From cable connection to first part pick, the intuitive interface guides you step by step—accelerating deployment and boosting productivity in demanding automation environments.

EZS Series – Electric Linear Slides with AZ Hybrid Stepper Motor The EZS Series offers compact, high-precision electric linear slides with integrated ball screw and guide rails. With a battery-free absolute encoder from the AZ Series, the unit enables reliable positioning without homing – ideal for clean, efficient automation. Key Specs Sizes: • EZSM3: 54 × 50 mm • EZSM4: 74 × 50 mm • EZSM6: 74 × 66.5 mm • Motor Orientation: Straight or Reversed (Left/Right) • Stroke Lengths: 50 – 850 mm (in 50 mm increments) • Lead Pitch: 6 mm or 12 mm • Repeatability: ±0.02 mm • Max Speed: Up to 800 mm/s (depending on model) • Permissible Moment (EZSM6, static): up to 340 Nm • Load Capacity: Up to 30 kg vertically / 60 kg horizontally (depending on model) Key Features • Built-in Absolute Sensor (AZ Series): No battery, no homing required • Dust-Proof Stainless Steel Design: With smooth-running rollers • Low Particle Generation: Cleanroom compatible for some selected versions (ISO Class 3 achievable) • Space-Saving: Reversed motor up to 136 mm shorter than straight type • Electromagnetic Brake (optional): Holds load in vertical applications • Flexible Communication: Supports EtherCAT, EtherNet/IP, PROFINET, Modbus RTU

Harness the potential of the Digital Twin throughout the entire value chain by using simulation to fully test and optimize your manufacturing in a virtual environment before it is built and deployed in the real world. With the Digital Twin, real-time data from the actual manufacturing environment can be fed into a simulation model. The insights gained from the manufacturing process aid in strategic and operational business decisions. Through virtual testing, it is possible to predict and continuously optimize the future performance of the production facility.

Oriental Motor Fan Motor Series EC Fans (Electronically Commutated DC Fans) Compact fans with integrated brushless DC motors and built-in electronics. They offer high efficiency, quiet performance, and precise speed control—excellent for temperature-controlled applications under varying load. Axial Flow Fans Propeller-driven fans designed to generate large airflow along the axis of rotation. Well suited for ventilation and cooling of electronic enclosures or entire systems. Available with filters, IP ratings, and alarm features. Centrifugal Blowers Fans featuring a narrow discharge outlet and high static pressure via radial airflow. Excellent for spot cooling, ducted installations, or cases with significant airflow resistance. Delivers focused air delivery even in compact setups. Cross Flow Fans Elongated fans with a cylindrical impeller that blows air sideways, creating a wide, uniform airflow. Ideal for horizontal cooling across surfaces or installation in long, narrow enclosures—commonly used as air curtains or flat-panel cooling devices.

The inverse and modular cable entry system KDSI-SR provides maximum flexibility, enormous time savings as well as safe sealing of cables with or without connectors. The one-piece screw frames allow quick and complete assembly from the outside to the inside. Assembly is very easy, as the simple assembly principle of the KDS system remains virtually unchanged.