Exhibitor products

We provide front panels in accordance with your specifications: Witte Technology will manufacture front panels, front films, membrane keyboards, decorative film, faces etc. for you from a wide variety of materials and thicknesses in almost any design that is required. Characteristics of plusform® front panels: Use of different materials in different thicknesses, which we equip with adhesive that is coordinated with your applications. The front panels are equipped with the colour system, which is usually applied between the film and the adhesive, protecting the printing from chemical and mechanical effects. We provide: - Printed surface structures - High-relief embossing, raised control elements - Adhesive-free windows - Individual punchings - Translucent colouring Transparent display windows

The PM2 pinion is designed for gearboxes with a flange output shaft, and is equipped with a mechanical interface which is standardized in accordance with ISO 9409-1. Its small number of teeth allows high feed forces. The PM2 pinion for flange output shafts is mounted to the following gearbox series: PFHE, PSFN, PLFN and WPSFN

The PN/CAN gateway CANopen represents a full-featured CANopen master. As a master, the gateway supports network management, SYNC telegrams, nodeguarding/heartbeat for monitoring the nodes and LSS services. Up to 16 PDOs can be configured per CANopen slave. The parameterization of the CANopen nodes via SDO telegrams and the management of emergency messages is also possible. On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transmission rates of up to 100 Mbit full duplex; on the CAN bus, up to 1 Mbit/s is supported. The I/O data of the CAN nodes are mapped transparently and freely configurable into the PROFINET network and can thus be processed directly in the PLC. The PN/CAN gateway is integrated into the hardware configurator with a GSDML file and can be fully configured there. Further software tools for parameterization, or handling blocks for programming, are not necessary, which makes the use of the gateway uncomplicated. The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance characteristics of the PN/CAN gateway.

With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC. Received input data on one side of the network are made available as output data on the other side of the network to the PLC. The I/O data exchange takes place live and as fast as possible without further handling blocks. The maximum size of the transferable I/O data is 1024 bytes. Up to 3 input and 3 output assemblies can be configured on the EtherNet/IP network side. Up to 300 slots are available for I/O modules. The integration into the PLC engineering tool is made possible by a GSDML file, an extra configuration software is not necessary. The configuration of the I/O data to be exchanged is performed in the Siemens engineering tool. An EDS file matching the configuration can then be downloaded from the website by the PN/EtherNetIP Coupler and used to configure the EtherNet/IP PLC.

The MQTT protocol has become established in recent years as a simple transmission protocol for messages in the IoT world. MQTT stands for "Message Queue Telemetry Transport Protocol" and is an OASIS standard. The MQTT protocol always uses a central broker for communication between devices, which receives messages from, for example, a sensor and forwards them to interested devices, such as a control unit. When a sensor sends data to the broker, it is called a "publish". If a device needs data, it must subscribe to the broker ("Subscribe"). The broker delivers the data to all subscribers when new data has arrived from the publisher. With the PN/MQTT Coupler it is possible to transfer values between a PROFINET machine (PLC) and a MQTT broker. It is possible to send values from the PLC via PROFINET to a broker ("Publish") as well as to subscribe values from a MQTT broker and receive them in the PLC via PROFINET ("Subscribe"). The integration into the PLC engineering tool is enabled by a GSDML file, an extra configuration software is not necessary. All settings for the MQTT connection can be done on the web page of the device. MQTT brokers can be connected locally in the own network ("On premise") as well as via the internet in the cloud. Direct integration into the PLC puts full control of the data exchange with the IoT world in the hands of the programmer.

Seamless data flow across networks. With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks. The maximum size of the transmitted IO data is 1024 bytes. Up to 16 slots for IO modules of 1 byte and up to 128 bytes are available. The incorporation into the PLC engineering tool is made possible by a GSDML file; special configuration software isn’t necessary.

Our customizable material utilizes resistance or capacitance to detect mechanical force, changing its conductivity in a compressed state. Made from medical grade polymers,it is engineered for stability and overload resistance. Flexibility delivered in 0,4mm sheets and customizable to various shapes and sizes. Adaptability for a wide range of applications from robotics and automation to wearables. Sensitivity at low forces and microns of compression with extended range capabilities. Durability to withstand harsh conditions while maintaining performance integrity.

Our specialized kit is ideal for engineers, technicians and research institutions who want to begin quickly and efficiently. Our kit is developed as a plug-n-play product with everything inlcuded to get started. Five Readouts can be used in parallel with the provided force sensors. Seamless Integration is provided with established communication protocols over USB and I2C. The LED Readout is equipped with range calibration buttons to be used for stand alone visualization. The compact Design facilitates easy installation with a form factor of only 60x35x16mm.

WINKELMANN präsentiert maßgeschneiderte Pneumatik für Ihre Anwendung: Entwicklung, Individualisierung und Produktion mit SMC & Festo Pneumatik-Komponenten. Effizient, präzise und perfekt auf Ihre Prozesse abgestimmt.

Simple and uncomplicated connection of a PROFINET network with a ModbusTCP network is possible with the PN/ModbusTCP Coupler. The PN/ModbusTCP Coupler enables data transmission between a PROFINET controller and ModbusTCP participants. Received input data on one of the network sides is made available as output data to the other network side. The IO data transfer takes place live and as quickly as possible without additional handling blocks. The maximum size of the transmitted data is 1024 bytes input/output data. Up to 300 slots for I/O modules are available via which the PROFINET data can be connected to the ModbusTCP coils, inputs and registers as required. The full ModbusTCP address space of 65536 coils, inputs and registers is supported. The integration into the PLC engineering tool is made possible by a GSDML file. In addition to the PROFINET/ModbusTCP communication, the PN/ModbusTCP coupler also provides an MQTT publisher on both network sides. This means that the values ​​exchanged via the gateway can also be distributed to visualization or production data acquisition systems via MQTT.

Slim LED control cabinet light with switch or sensor, flexible mounting and three lengths – 24 V or 120 V.

The polyester Ex enclosure range comprises sizes of 75 x 80 x 55 mm to 405 x 400 x 120 mm. These enclosures are supplied as component-certified empty enclosures and pre-assembled as Ex e or Ex ia approved enclosures. These robust enclosures obtain their typical black coloration thanks to the addition of graphite to the glass-fibre-reinforced polyester material. These enclosures' high degree of protection (IP 66) makes them suitable for both indoor and outdoor use. An extensive range of accessories rounds off the universal character of the polyester family of Ex enclosures. The enclosure body consists of glass-fibre-reinforced polyester with a graphite additive. The lid and the base are screwed together by means of tethered stainless-steel screws. An offshore variant for equipping with cable glands for armoured cables is also available on request.

Our HSB-gamma® portal linear units are the proven choice for building versatile multi-axis systems across a wide range of applications. Each HSB-gamma® unit is based on a closed, high-rigidity aluminum profile developed in-house. Equipped with powerful ball guide rails, they deliver high load capacity and reliable performance even under demanding conditions. All functional and mounting surfaces are precisely machined to ensure accurate integration and long-term stability. The HSB-gamma® series is available in five sizes, from HSB-gamma® 90 to HSB-gamma® 280. To meet practical application requirements, various drive options are available, allowing flexible configuration for different system concepts.