Exhibitor products

Bestellen Sie die Strahlanlege Formlabs Fuse Blast um Ihre gedruckten SLS Kunststoffteile ganz einfach zu entpulvern.

very precise temperature range -80...200°C pressure-proof up to 25 bar IP 65 with integrated hx processor for determination of the values dew point temperature, mixing ratio, enthalpy, absolute humidity and wet bulb temperature on-site adjustment via buttons and LED, three designs, optional with display: AW / AK / BW / BK / BZ A Series: Plug-and-Measure- exchangable probes B Series: probes are firmly connected Accuracy: Humidity: ± 1.5% RH 10...90 % rh at 23 °C Temperature ± 0.15 K at 23 °C Designed for use in industrial process automation, the sensors of the A + B series can be installed in virtually any position. The robust devices are available to be mounted in ducts, on walls, or are available with a stainless steel probe which can be up to 5 m away from the output electronics. Depending on the application, we either recommend using transmitters with exchangeable or permanently assigned probes. The type of filters and filter materials can be adapted to suit the respective protection category required (up to IP65). All devices work with an internal processor which uses the measured values for relative humidity and temperatures to also calculated enthalpy, absolute humidity, mixture ratio (water/air) or the wet-bulb temperature. Digitalization of the signal processing allows the measurement accuracy for humidity to reach excellent values of ±1.5 % RH, and with the platinum resistance sensor, the accuracy of the temperature measurement reaches tolerances of ±0.15 K. Depending on the individual design, the sensors can be used at temperatures of between -80 °C and 200 °C and at pressures of up to 25 bar in non-corrosive air.

very precise temperature range -80...200°C pressure-proof up to 25 bar IP 65 with integrated hx processor for determination of the values dew point temperature, mixing ratio, enthalpy, absolute humidity and wet bulb temperature on-site adjustment via buttons and LED, three designs, optional with display: AW / AK / BW / BK / BZ A Series: Plug-and-Measure- exchangable probes B Series: probes are firmly connected Accuracy: Humidity: ± 1.5% RH 10...90 % rh at 23 °C Temperature ± 0.15 K at 23 °C Designed for use in industrial process automation, the sensors of the A + B series can be installed in virtually any position. The robust devices are available to be mounted in ducts, on walls, or are available with a stainless steel probe which can be up to 5 m away from the output electronics. Depending on the application, we either recommend using transmitters with exchangeable or permanently assigned probes. The type of filters and filter materials can be adapted to suit the respective protection category required (up to IP65). All devices work with an internal processor which uses the measured values for relative humidity and temperatures to also calculated enthalpy, absolute humidity, mixture ratio (water/air) or the wet-bulb temperature. Digitalization of the signal processing allows the measurement accuracy for humidity to reach excellent values of ±1.5 % RH, and with the platinum resistance sensor, the accuracy of the temperature measurement reaches tolerances of ±0.15 K. Depending on the individual design, the sensors can be used at temperatures of between -80 °C and 200 °C and at pressures of up to 25 bar in non-corrosive air.

The combination of skilled work, maximum precision and the efficient use of our capacities is what ensures excellent quality, punctually and every time. BOPLA takes care of the individual and precise manufacture of your product. ● Machine Finishing ● Individual improvement ● Touch / display integration ●Integration of electronics ● Assembly

The new Abox | Abox Pro A successful generation change. In a world of constant change, the demands on electricians are also constantly increasing. In an industry characterised by further development, the many years of experience of older generations meet the innovative ideas of young talents - an unbeatable combination. We utilise this to pave the way for pioneering technologies and progress. Our new junction boxes Abox | Abox Pro combine the best of both worlds, setting new standards in efficiency and performance. We understand the dynamics of the electrical industry and know that flexibility and reliability are key. To simplify your day-to-day work, we have developed our new Abox, which not only meets current standards, but is also up to the challenges of tomorrow. With us, you don't have to think - you can "just do it"! Abox Pro industrial and unprotected outdoor areas Made for extreme requirements. Maximum protection under challenging conditions - that's why we developed the new Abox Pro. Thanks to high-quality components and a robust design, the new junction boxes guarantee high impact resistance and protect against water, heat and sunlight. The patented multiple knock-out membranes enable simple and clean knock-out, while the choice of entries and cable diameters remains flexible. The ability to mount mounting rails, PCBs or mounting plates makes the Abox Pro extremely versatile. With it, we are setting new standards in terms of reliability and adaptability. The XT version of the Abox Pro is also ideal for installation in the ground and in flooded areas. The Abox Pro can also be installed under the high requirements of the agricultural and agricultural sector as well as shipping.

If a machine or plant has already integrated IO-Link as a bus system, it makes sense to also control absolute encoders with this bus system. The actual value communication is compatible with normal digital initiator communication between the encoder and the next distribution node in star distribution. This can collect a lot of information and usually connects via powerful Industrial Ethernet to the higher-level controller. Position and speed are provided for the process. With operating hours counter and device status, the absolute encoder also provides data for preventive machine maintenance. C__582 with IO-Link provides the option of converting internal states into programmable switching states of the digital output.

Absolute encoder from TR-Electronic with freely configurable analog interface Even in the age of Industrial Ethernet, IO-Link and Industry 4.0, analog signal transmission is still widespread and is used in new systems. It is a very cheap alternative on the control side if the desired resolution is suitable for analog transmission. Even the simplest controllers have analog interfaces that can be used for simple position or speed feedback. And - implemented as a current interface - larger transmission lengths can also be implemented easily. The analog interface from TR-Electronic in the latest encoder series is a true all-rounder. The multiturn position signal can be used as the basic variable for the 16-bit D / A converter. The speed signal can be used as well. When the position value is selected, the start and end point of the converted range can be freely set within the entire multiturn measuring range. You can also configure whether the analog signal is output as voltage (0..10V, -10..10V) or current (0..20mA, 4..20mA). As a current interface with "live zero", the analog interface provides a very effective method of implementing secure transmission. Live zero interface reliably monitors both the function of the encoder and wire break quite simple without protocols and software and on just two wires. Thanks to the modular concept of the latest generation of encoders from TR-Electronic, the analog interface is available for all detection systems. Magnetic detection offers sufficient resolution even for positioning over several revolutions, high-resolution, optical detections provide enough position resolutions to control the analog signal even with the smallest movement ranges. All mechanical variants are available with the new analog interface: size 58 with solid shaft, blind hole and hollow shaft up to 15 mm, in size 80 with continuous hollow shaft up to 27 mm, in size 110 with continuous hollow shaft up to 50 mm.

AC asynchronous motors can be found in many different applications - be it in industry, transport or even in private households. Single- or three-phased, designed in different sizes, AC synchronous motors are characterized by their simple and robust build. As long-term runners, they require very little maintenance, are long-lasting and cost-effective . Advantages of our AC motors: • Robust, low-maintenance design • Very cost-effective • Long lifetime • Easy control • Low noise • Compact design and different rotation directions • Can be combined with a variety of gearboxes as well as with speedometer and brakes

A secure, uninterrupted, and constant power supply is essential for every company. Whether fluctuations in decentralized power networks, reduction of peak loads, reliable supply of critical technologies in industrial plants, data networks, and telecommunications or the operation of renewable energies: Uninterruptible power supplies fulfill a demanding task. Especially for applications that require alternating current, the use of AC UPS systems is recommended.

Accessories Document pockets, ground straps and plug sockets are just a few of the practical accessories available for switchgear cabinets.

- Convenient parameter assignment via Bihl+Wiedemann software suites - Transmission of up to 4 × 16 Bit Process Data in 1,27 ms - Up to 32 bytes of cyclic process data - 1 IO-Link Port Class A (BWU4748), Power supply of IO-Link ports out of ASi - 1 IO-Link Port Class B (BWU4088) - 2 IO-Link Ports, e. g.: 1 IO-Link Port Class A, 1 IO-Link Port Class B (BWU4077)

ACURIA is the most precise machine light we have ever built as a machine light professional. With the most powerful, efficient lighting technology. With the best tightness. The safest protection against high temperatures. The best cable protection and the easiest installation. The simplest control and the most seamless integration. More precisely thought, more precisely shaped, more precisely built. A perfect combination of Waldmann know-how for industrial lighting and application-oriented design language by renowned product designer Dominic Schindler.

The AD-FM 300 GT (1-channel) and AD-FM 600 GT (2-channel) are freely programmable frequency/analog measuring transducers with integrated display unit. Due to its multifunctional processing of the input frequency and the up to 2 analog outputs (current/voltage) per channel or the evaluable digital outputs, the device is optimally suited for the display of instantaneous flow rates with simultaneous evaluable counting pulse output for water meters with main and sub meters. Especially for large water meters with bypass, a scaled summation is integrated in the AD-FM 600 GT. Both the instantaneous flows and the counted quantities are output. A low level suppression is shiftable. Application The main area of application is the through-flow measuring at water meters. Further applications are the measuring of rotation speed or energy consumption. Specific characteristics - 1 (AD-FM 300 GT) or 2 (AD-FM 600 GT) channels in just one housing - Inputs: NAMUR, contact, open collector, 3-conductor Opto, 24V activ - Analog outputs: each channel 1 current and 1 voltage (synchronous) - Digital outputs: relay respectively optocouple (puls function or limit contact) - Scaled summation and shiftable low level suppression - Programming directly on the device or free programming software - DIN rail mounting

The digital power and energy meter AD-LU 20 GT measures all standard values of the three-phase system (active-, reactive-, apparent-power, voltage, currents, harmonics, power factor etc.) and provides this via an Ethernet interface. The measured values can be read out via Modbus-TCP protocol. In addition, these measured values are displayed on an integrated small WEB server. The device can also be parameterized via this WEB server. The AD-LU 20 GT is also equipped with an RS485 interface. This RS485 interface with Modbus-RTU protocol is mainly suitable for connecting an external display (AD-MM 400), but can also be used to read data or parameterize. The current is fed via the front-mounted through-current converters, which can measure up to 20 A directly. However, additional current transformers for larger currents can also be connected at any time. It is possible to measure symmetrical or unbalanced 4-wire networks and symmetrically loaded 3-wire networks. Due to the integrated, efficient wide-range power supply, the device operates in a large supply voltage range and does not heat up very much.

The digital power converter AD-LU 40 GT measures all values of the three-phase power grid such as current, voltage, energy, active, reactive, apparent power and frequency and makes this data available via a fieldbus. The device is therefore ideally suited for integration into energy management systems. The ProfiNet variant contains a 2-port switch for direct forwarding to the next device. 3- or 4-wire networks can be measured. 4-wire networks may have balanced or unbalanced load. 3-wire networks must have balanced load. The AD-LU 40 GT is powered by its measuring voltage L1. However, a variant with separate supply terminals and wide-range power supply is also available (AD-LU 40-S GT). The current measurement takes place via the throughput converters attached to the front. For the measurement of higher voltages or currents, external converters can be connected at any time. LEDs on the front panel signal the operating state and the data traffic. The compact design and the high performance combined with low energy consumption allow it to be used in almost any application. In addition, the device has a front-sided RS485 interface to which, for example, the TFT display AD-MM 400 can be connected. Thus, without any great effort, all measured values can be displayed. Application Measurement and monitoring of all electrical characteristics in electrical systems. Detection of load profiles for energy management systems, e.g. ISO 50001. Recording the energy consumption of individual consumers. Monitoring of voltage quality variables, e.g. Harmonics. Attention: This is a Class A product according to EN 55011. Additional EMC actions may be necessary when used in small businesses or in residential areas. Specific characteristics - Fieldbus interface for PROFINET or PROFIBUS - RS485 interface for connecting a TFT display