Exhibitor news

Pre-wired to the wastewater treatment plant A complicated installation between pumping stations and agitators is too time-consuming, cost-intensive and also disrupts the work on site. For this reason, the international electrical engineering general planner wanted the most convenient solution possible for preparing the control system for a sewage treatment plant (5 soccer fields in size) in Bahrain, Arabia. The switch specialists from Kraus & Naimer had it. Developed according to a whole list of customer specifications, they assembled the ready-to-use mini switch cabinets directly in Karlsruhe, which can now be fully integrated into the sewage treatment plant. Main switches in 8 power ratings, different cable cross-sections and combinations of operating elements - countless different variants were built and pre-wired according to a precise plan. Ready-made, but expandable One of the requirements was: only one cable for the main and control circuits. For this reason, multicore cables were used. Instead of 2 or 3 cables, only one cable needs to be routed out of the mini control cabinet. Nevertheless, it should be possible to add additional sensor cables. For this reason, additional free terminal blocks were fitted inside the enclosures, which can be connected on site if required. Protecting the devices against external influences such as vapors or shocks ... ... was also an issue. That's why the choice fell on robust polyester enclosures with similar mechanical properties to metal. They are robust and weather-resistant and reliably protect the inner workings. Together with additional main switches and emergency stop buttons in the enclosure, 160 fully assembled parts left the Karlsruhe plant on time for Bahrain. More than standard Kraus & Naimer not only develops and produces ...

Thanks to their high level of mechanical stability and also their resistance to UV radiation and changes in temperature, the Euromas and Bocube series of enclosures are the absolute specialists for outdoor use. They set the scene perfectly for modern industrial electronic products, which they also protect against extremely harsh environmental conditions, for example in IoT applications, in the radio technology sector or in smart cities. BOPLA has now developed a standardised high-quality stainless steel mast bracket for fitting to masts, posts, poles and pipes. Five sizes for the huge range of industrial enclosures The modular system consists of a mast bracket, a set of screws and a mast clamp. The special feature: BOPLA’s entire range of several hundred sizes and versions of industrial enclosures can be used with only five different mast bracket types. The positioning of the enclosures is not important, because fitting can be either vertical or horizontal. This flexibility is achieved by means of an intelligent arrangement of the drill hole diameters and positions, in addition to the partial use of slots. Stable mast bracket for every application The set of screws and the mast clamp are available separately. The set of screws can be supplied in three versions and combined with the mast brackets in any way required – the relevant configuration tables can be found on BOPLA’s website. The mast clamps are available in nine sizes for different mast diameters. This modularity gives the customer the exact matching system for any application. The mast bracket was designed especially for use with the Euromas and Bocube product ranges and can be adapted for other enclosure types on request.

Bünde/Villingen-Schwenningen, October 4, 2023. Almost invisible, but so effective. Transparent heating systems are real problem solvers in a very wide range of sectors. The automotive industry is a pioneer in this, including with heated headlamps and mirrors. When fitted in automobiles, transparent heating systems make it possible for vehicle automation sensors to generate precise 3D mapping in all weather situations. In the meantime, the field of use for transparent heating systems has expanded many times. KUNDISCH GmbH & Co. KG, the Villingen-Schwenningen manufacturer of membrane keypads and touch systems, uses special technology for its heating films. Harsh weather outdoors, temperature variations in a terrarium – together with other sensors, optical cameras must withstand the conditions existing in their field of application. In order to ensure that these cameras remain active, the field of view must always be free of condensation and ice. Harsh weather or temperature variations can become a genuine problem and put correct functioning at risk. The solution? Transparent heating systems which protect both the field of view and the sensors against external influences – always with maximum transparency.

They don’t need a workout at the gym, yet they’re still incredibly strong: IWS System crane systems handle the lifting and transport of everything from small to massive loads on behalf of humans. But their energy must first be reliably channeled and second, safely stopped – preferably in stages. To achieve this, Heiko Grüner, Head of Electrical Maintenance at IWS System, was looking for a straightforward control system and has now found a suitable custom solution from Kraus & Naimer – tailored exactly to his requirements. Configurable crane system made in Germany The modular system of the IWS “THE LINE” light-duty crane is the flagship product of this 25-person company based in the Vogtlandkreis. Unlike many traditional gantry crane installations, it stands out for its simple assembly, fast delivery times, and maximum lifting height even with a minimal overall height. The modular system allows for adjustments and expansions at any time, making it ideal for changing operational requirements. For example, a model requiring just three square meters of floor space is sometimes needed because there is hardly any room on site for larger structures. In other cases, IWS equips entire industrial halls where massive crane bridges move loads of up to one ton, thereby significantly streamlining processes in production, warehousing, and assembly. To see the complete article: https://www.krausnaimer.com/de_en/info/kraus-naimer-module-improves-crane-system

The new BOP 7.0 PQ and BOP 10 BoPad console variants are based on the existing BOP 7.0 and BOP 10.1 BoPad enclosures, but their higher shape provides more space for the installation of electronic components. The new design has a greater angle for the operating surface, and this ensures more operating comfort. In addition, side-mounted recessed grips make it even easier to handle the BoPad enclosures. The rear panel is positioned further back, which increases the mechanical protection of the interfaces. As with all the hand-held and console enclosures in the BoPad range, the new models also have a recessed area in the lid for the integration of membrane keypads and touch screens. A polished frame creates a high-quality appearance and protects the operating surface. All BoPad enclosures provide protection class IP40 as standard. However, this can be increased to a maximum of IP65 at any time by the use of optional seals in four colours (black, white, signal red and signal blue), and also subsequently if required. All BoPad enclosures are supplied in two colours (black and white). In addition, and especially for BoPad hand-held enclosures BOPLA offers as an option coloured impact protection in black, signal yellow, signal red and signal blue. As always, BOPLA can provide special colours on request for enclosures and impact protection.

BOPLA’s Mathias Bünte explains, “CombiNorm-Control is especially interesting for applications in the building automation sector or in so-call smart homes. The German DIN 43380 has established itself as an international standard in this field of application.” CombiNorm-Control has a typical “T-shape” design, and the front part of the enclosure is dimensioned in such a way that it can fit through a standardised panel cut-out with a height of 45 mm. In the rear section there is assembly space on both sides for connection terminals. Of course, for a standardised enclosure system the width is also defined precisely and stated in “M” module widths (1M = 17.5 mm). CombiNorm-Control is available in five different standard widths, and more versions are planned. As with all products in the CombiNorm series, the integrated DIN rail adapter makes possible fast, efficient mounting on a TS35 DIN rail in accordance with DIN EN 60715. For a fast start to a project, BOPLA offers its customers a complete set in every size with the matching terminals and standard accessories. Although to a large extent the external enclosure design is determined by the DIN norm, the configuration can vary considerably, depending on the application. For this reason, CombiNorm-Control is mostly constructed in a modular way. The enclosure can be configured individually with the use of different front panels and terminal covers. The basic body consists of few individual components which can be latched together without the use of any tools.

Just holding on is not enough. When carrying out maintenance work on storage and retrieval machines or when traveling on driverless conveyors - the active activation of an enabling switch provides additional safety for the person traveling with you. If she presses a button with both hands at the same time, it is clear that she is actually in the intended, safe place. ➔ That's why the handle and button IN ONE! NEW: KN-C FH07 Functional handle with 3-level enabling switch: • Yellow enabling switch with silicone cap (meets the standards according to DIN EN 528:2023-02 according to IEC60204-1, IEC60947-5-1, IEC60947-5-8) • 3 levels: OFF – ON – OFF • 2 redundant working contacts (changeover contact) + 1 auxiliary contact (1 NC) • Aluminum handle, finely ground and anodized in natural color • Handle shank polyamide P A6, black with fine structure • 5m connecting cable from the screw surface of the handle leg • Protection class IP65 • Operating temperature -25°C to +60°C • 250V AC/DC, 3A • LED red + LED green (24V DC) • Emergency stop variant with 2 NC

Thanks to their high level of mechanical stability and also their resistance to UV radiation and changes in temperature, the Euromas and Bocube series of enclosures are the absolute specialists for outdoor use. They set the scene perfectly for modern industrial electronic products, which they also protect against extremely harsh environmental conditions, for example in IoT applications, in the radio technology sector or in smart cities. BOPLA has now developed a standardised high-quality stainless steel mast bracket for fitting to masts, posts, poles and pipes. Five sizes for the huge range of industrial enclosures The modular system consists of a mast bracket, a set of screws and a mast clamp. The special feature: BOPLA’s entire range of several hundred sizes and versions of industrial enclosures can be used with only five different mast bracket types. The positioning of the enclosures is not important, because fitting can be either vertical or horizontal. This flexibility is achieved by means of an intelligent arrangement of the drill hole diameters and positions, in addition to the partial use of slots. Stable mast bracket for every application The set of screws and the mast clamp are available separately. The set of screws can be supplied in three versions and combined with the mast brackets in any way required – the relevant configuration tables can be found on BOPLA’s website. The mast clamps are available in nine sizes for different mast diameters. This modularity gives the customer the exact matching system for any application. The mast bracket was designed especially for use with the Euromas and Bocube product ranges and can be adapted for other enclosure types on request.

Constant cleaning, dust and an aggressive climate push materials to their limits. A&L Tierfrischmehl Produktions GmbH from Diepholz also has to contend with this time and again. Its complex and extensive evaporation plant is driven by a large number of motors and turbines. As such systems have to be repaired or at least maintained time and again, the installation of repair switches in the individual sections is essential. This allows sections to be disconnected from the power supply and made safely accessible. Unfortunately, however, the switches responsible for this have so far failed far too quickly. “For one thing, we have to constantly go over it with the water hose. Secondly, aggressive vapors are also produced during cleaning, which our previously installed repair switches simply couldn't withstand. The plastic housings broke or the foam seals became crumbly and we had to replace them every few months. That costs money, time and nerves, explains Torsten Bünker-Apetz, master electrician in the repair and maintenance department at A&L. However, as the hygiene regulations in the food industry are very strict, it is also necessary to clean the external areas – where the switches are located – thoroughly. You'll find the complete article on our website: https://www.krausnaimer.com/de_en/info/robust-maintenance-switches-for-demanding-applications

Plant safety is vitally important for the safe operation of technical plants. As a machine manufacturer or operator you are legally obliged to ensure the safety of plant, machinery and devices. Training teaches you to identify risks and avoid accidents. Further training for safety officers and employees is the key to success here. With this knowledge you can operate plants more efficiently and safely carry out maintenance work. By integrating plant safety into your company you are demonstrating responsibility and increasing the confidence of authorities, employees and the public. Plant safety also contributes towards the prevention of environmental pollution and damage. <b>Machinery Regulation made simple: Our training offer is now adapted to the requirements of the new Machinery Regulation. Use the time to acquire the knowledge you need. Whether it’s a fundamental or an expert course – with Pilz, you always have your finger on the pulse.</b>

Permafrost refers to ground material such as rock or unconsolidated rock that has a permanent temperature of 0 °C or colder. In summer, the layer near the surface, known as the thaw layer, thaws. In Switzerland, permafrost covers around four percent of the country's surface and mainly occurs at altitudes above 2,500 meters above sea level. There are two main types of permafrost in the mountains: Ice-poor permafrost: Occurs in high altitude rock faces where ice is only present in crevices and pores in the frozen rock. Ice-rich permafrost: Located at the base of steep slopes where material from snow avalanches and rockfall is deposited and forms an ice-rich bedrock over a period of years. This study in the link focuses on rock glaciers.

The test equipment series from SAXOGY POWER ELECTRONICS are used to test power electronics or semiconductor controls (gate drivers) and are tailored entirely to the intended application of the respective customer. The devices, systems, electronic components and safety concepts designed and manufactured in-house impress with their high quality, long service life and maximum safety. When it comes to safety, there are countless standards that describe the methods to be used. A safe test tool should be one thing above all else: an aid. SAXOGY has come up with a lot of ideas so that a user can get used to their safe testing device. The solutions are well thought out and practical. HMI – Interface in a slim design and pleasant to the touch The few square centimeters of the HMI are the most touched of the entire system. It stands to reason that the surface and the virtual presentation behind it should be of high quality. A perfect component was found for this with the powerful KN Controls 700 Plug & Play. The virtual surfaces can be created yourself with little effort. The high-resolution glass display with multi-touch PCAP touchscreen, the slim depth and the completely closed housing make the device look good anywhere. The M22 single hole mounting on the back offers a high level of flexibility during assembly. The touch panel series from Kraus & Naimer offer a lot of freedom when it comes to installation and integration. They communicate with a wide variety of common protocols and are available with these software options/programming environments: JMobile: Visualization software for industrial automation and edge management CODESYS: Soft PLC according to IEC 61131-3 WEB application: Chromium (HTML5 connection to control visualization) There is no lack of know-how and manpower at SAXOGY, but that is not the case in all companies. In this case, the Kraus & Naimer application team supports its customers in setting up their project and helps with problems.

The PRFD series cylindrical proximity sensors are available in standard and IO-Link communication models. The sensors feature long sensing distances and full-metal housing and sensor heads made of stainless steel 303. The robust sensors provide high durability and can be applied in diverse environments including food and beverage manufacturing, chemical, and metalworking industries. The status indicator offers users to quickly identify operation status from various angles.