Exhibitor products

The S8VK-WB is the most compact 3-phase power supply, designed to fit small control panels. It provides additional troubleshooting information to reduce downtime and provides greater environment resistance for a wide variety of applications. - Compactness, side-by-side mounting - Power boost up to 150% - LEDs and digital outputs for easy diagnostics - PCB board coating for better resistance to environment - Vibration resistant 5G - Guaranteed altitude up to 3,000 m - Push-in Plus terminals Compact body allows easy replacement High efficiency with full functionality. This high capacity and compact power supply requires less than half the space of existing models. Side by side mounting is possible with this world's smallest class of three-phase power supply.*1 *1. According to OMRON investigation in November 2018. LED and signal output indicates the status of the Power Supply When the door of the control panel is closed, you can still check the status of the power supply via your controller using the signal that is output matching the LED. This feature clarifies the error status and maintenance location, minimizing downtime.

Modern intralogistics and automotive production systems are highly automated and demand flexible, safe solutions. Functional safety is essential—not only to protect personnel but also to prevent production disruptions. The TÜV-certified VCS-SMG-SAFE application controller enables easy implementation of safety functions in combination with the VCSX drive controller. Preconfigured safety logic tailored to the application is included from the factory, allowing full control and monitoring of drive systems via VCS-SMG-SAFE. Safety functions such as SLS (Safely Limited Speed) and SPOS (Safe Position) can be easily realized for electric monorail systems. Local adaptation of system parameters is straightforward, eliminating complex PLC programming. Data exchange is limited to process and diagnostic data. The system includes a safe input for manual/automatic switching and supports both HTL and SSI encoder interfaces. Communication with the plant PLC and VCSX drive controller is handled via the proven PROFIsafe protocol. Data transmission between stationary and mobile components uses the highly reliable SMGM slotted waveguide system. Combined with modules for drive control (vDRIVE), power supply (vPOWER), positioning (vPOS), and data transmission (vCOM), VCS-SMG-SAFE is part of VAHLE’s complete system solution for safe and efficient automation.

Relay PPRS with Push-in-System Our PPRS relay bases with push-in connection system are available in versions for two- and four-changeover relays. The bases are designed for a rated voltage of 300 V and can be equipped with relays and the associated plug-in modules and status displays. In order to ensure the vibration safety of the relay, it is possible to mount a retaining bracket. The pluggable external cross-connectors and doubled connection elements enable simple potential distribution.

Safety is not a product, but a process, deeply rooted in the DNA of your automation. Functional safety and industrial security form two strands that intertwine like a double helix. It is only when they interact that the resilience that protects people, machines and data in equal measure is created.

The SCx Safety Controller completes the SMART Safety System for complete machine and system protection. You can add up to eight I/O expansion modules, use Daisy Chain Diagnostics (DCD) and exchange data via three different fieldbus protocols. This means that the SCx expandable safety controller can meet all the safety requirements of your machine. Programming is easy thanks to the intuitive, proven and free software. - PC-configurable – Flexible and easy to use - Network-compatible – Profinet, Modbus/TCP and EtherCAT - Safe devices to connect: Up to 394 - Safety inputs: Up to 154 - Independent safety outputs: Up to 68, 0.5 A to 6 A each - Convertible safety inputs: Up to 40 (including 8 on the base unit) - Daisy Chain Diagnostic (DCD) provides detailed status and diagnostic information - Optional display provides local diagnostics for efficient troubleshooting - Up to eight possible expansion I/O modules can be added

Safety products are installed in potentially dangerous or hazardous areas to safeguard personnel from injury and protect equipment from damage. • Safety Light Curtains • Safety Controllers • Safety Door Switches • Safety Switches • Safety I/O Terminal Blocks

Schmersal is launching two new versions of its Safety Fieldbox. This means that the box can not only be integrated into systems with PROFINET/PROFIsafe as before, but is now also be available for the EtherNet/IP with CIP Safety and EtherCAT with FSoE bus systems. The benefit: the designer can now plan the safety functions of a machine in a project regardless of the fieldbus system that is used, as the three versions together cover the most commonly used control systems worldwide. The Safety Fieldbox from Schmersal enables flexible safety solutions, fail-safe and fast installation and maximum process transparency. It also enables easy connection of up to eight safety switchgear devices with plug and play. Universal device interfaces for eight-pin M12 connectors allow a wide range of different safety switchgear devices to be connected, including electronic and electromechanical solenoid interlocks, sensors, control panels, light curtains and switches. Unique features of the Safety Fieldbox from Schmersal include the need for just a single M12 slot for solenoid interlocks and safety light curtains and the connection of control panels with EMERGENCY STOP function and up to three non-safe command and signalling devices. An integrated digital input on each device slot allows the diagnostic signals of all connected safety devices to be evaluated. This means that safety-related and operational signals, such as those required for diagnostic purposes, can be collected and transmitted. The user can use this information to detect irregularities, e.g. a safety guard that has been moved, and enable prompt intervention if service is deemed necessary. This helps to improve system availability and minimise the risk of downtime. Users can also benefit from greatly simplified, and therefore more cost-effective, wiring of safety devices.

NEW FAMILY OF SAFETY RELAY MODULES WITH EIGHT BASIC VERSIONS All equipment versions can be employed in applications up to cat. 4 / PL e according to EN ISO 13849-1 and SIL 3 according to EN 62061 / IEC 61508. A major advantage of the new PROTECT SRB-E range is that, with each basic version, several dozen existing SRB modules can be replaced thanks to the multi-functionality. Each module can be configured for up to eleven different applications via a simple control element. All conventional safety sensors and electromechanical safety equipment can be monitored. The drastically reduced number of versions as well as a clear product-accompanying display of the eight versions with their relevant functions makes it considerably easier for the machine manufacturer to select the right module for its particular application. Functions such as start / reset monitoring or cross circuit monitoring, for example, can be set via a rotary switch. One version of the new SRB-E range is also distinguished by p-type fail-safe power semi-conductor outputs up to 5.5 A. This SRB-E variant is particularly suited to fail-safe applications with high switching capacity in conjunction with short cycle times, for example switching valve terminals or complete output modules. A combined version makes it possible to monitor two safety functions with one device, such as a two-hand control panel and an emergency stop function. The fail-safe outputs which in each case are available separately can be linked by the user according to the application. All PROTECT SRB-E versions are distinguished by very short response times in the requirements profile and signalise detailed diagnostic and status reports via LED displays. Another bonus feature of the new SRB-E range are the housings which have been optimised by Schmersal according to customer requirements.

Services for machine manufacturers and machine operators Machine safety requirements are growing in line with the performance and complexity of modern machines. Consistent implementation of standards and guidelines not only protects people and processes, but also increases the availability of your machines and systems. Our Safety Services combine technical expertise with practical experience. Consulting for the evaluation and optimisation of your safety concepts, engineering for technical implementation or training to qualify your employees – everything from a single source.

SAFEMASTER STS - The key to more safety Don‘t you wish you had a simple safety switch and trapped key interlock system to protect your dangerous working areas. If you are looking for a reliable, expandable, flexible and cost saving solution, then you have found the perfect product with our TÜV-approved system SAFEMASTER STS. The SAFEMASTER STS Program consists of modules that can be individually combined and adapted to your application. They combine the advantages of safety switches, interlocks and key transfer in one system. The modular design allows systems to be assembled out of several units, or to modify and expand existing systems as required. All mechanical interlocks can be utilised in machine and plant concepts without wiring. They provide an economic and reliable proctection in wide applications. With only a few single components, a number of individual interlock units can be assembled. The stainless steel units guarantee good stability. Extensive equipment allows a simple mounting.

The product range of safety sensors for machine safety includes solutions for door interlocks and access guarding, robot collaboration up to driverless transport systems. Safety light curtain: High detection stability and safety for use as a electro-sensitive protective equipment (ESPE). Safety light curtains are electro-sensitive protective equipment for safeguarding accesses and openings. These devices meet the highest safety standards of Type4, SIL3, Category4 and PLe. Due to minimal space requirements, robust housing and special accessories for reduced wiring and easy mounting, installation is efficient and simple. Each model has a high IP65/IP67 protection rating. Safety switches: machine safety made easy! Versatile mounting, flexible use and easy integration! Safety switches are safety components that can be installed on safety gates and doors to monitor access into a hazardous zone. This product range includes models with mechanical guard locking, electromagnetic guard locking and contactless models. Safety laser scanners: 100% customisable protection zone, even in complex areas! Safety laser scanners that meet the highest safety standards of Type3, SIL2, Category3 and PLd. Despite their compact size, the devices have a large detection area and individually designable safety areas and zones. These devices are ideally suited for technical protection measures of automated guided vehicles (AGVs) and robot cells and are a preferred alternative to mechanical safety devices and safety mats.

Safety technology for body, hand and finger protection is used to protect both people and machine. wenglor’s safety technology ensures compliance with legal requirements and meets the highest standards in occupational safety. Certified according to international standards, light barriers and curtains with or without muting functions, safety switches, locking devices, emergency stops, relays and protection columns protect all production systems. This creates a safe working environment, reduces downtime and increases the efficiency of production processes. Safety switches and guard locking devices ensure that machines can only be operated if all safety requirements are fulfilled. They prevent unintentional start-up of machines and protect against potential hazards. Emergency stop switches and safety relays enable immediate shutdown in an emergency and ensure the safety of personnel. Safety columns provide additional protection and clearly mark safe areas, helping to prevent accidents.

A new era of safe machine operation has begun: Touch technologies now combined with safety functions especially for DIN EN ISO 13849 (PLd) and DIN EN ISO 25119 (AgPLd). Capacitive touchscreen systems are ideal for displaying a wide range of functions, input fields, and status indications in a variable and application-specific way. Compared to electromechanical input technology, the combination of display and in­put system enables far more variable operating surfaces with a greater number of functions, plus intuitive operation. This reduces the number of electromechanical switches that otherwise have to be installed in the control consoles of mobile agricultural, construction, or forestry machines. This enables slimmer and more user-friendly control systems.

SafetySight Iridio is the innovative safety camera that integrates visual technology and advanced industrial safety. Following a request to restart the machine, it performs an automatic check of the area, detecting any operator motion before machinery start-up. This function reduces the risk of an operator in the danger area being involved in an accident caused by unexpected restart of the machine. SafetySight Iridio has a front-mounted RGB LED ensuring immediate communication of the device operating status through different colours for each operating mode. This enables to immediately verify the correct functioning of the system, thus facilitating operations and resolution of any anomalies. SafetySight Iridio is a complete safety device that interfaces with the rest of the system via digital outputs, so there is no need for a dedicated control device in the switching cabinet. Besides, it can be connected directly to any safety controller compatible with OSSD signals, thus reducing costs and installation complexity. This device is designed for safety levels up to SIL 2 acc. to IEC 61508 and PL d, cat. 3 acc. to ISO 13849-1. Dedicated Iridio Studio software has been designed for configuration and calibration of the device, guiding the user through the entire process in a few minutes. Through this software, it is possible to visually check the monitored area, identifying and excluding any zones outside the work area or any elements that may cause disturbance. The SafetySight Iridio device can effectively distinguish tampering attempts from scene changes due to non-critical environmental variations, such as parts of the machinery resting in a different position each time they stop. For applications that require monitoring of large or geometrically complex areas, it is possible to install multiple SafetySight Iridio devices. This modular architecture means the system can be adapted to the specific requirements of any installation.

Switch to the Original.