Exhibitor products

The innovation of BELTO® lies in its upper part: the head of the cable tie is flat!  Thanks to this patented innovation, there are no more cable ties to waste space in your installations. With BELTO®, you will have a high-quality, durable and aesthetic installation even in the smallest of spaces. Space saving: • The BELTO® cable tie’s patented, non-protruding head size allows it to fit into even the smallest spaces where there are many cables. • The BELTO® cable tie fits more easily into tight spaces. • BELTO® allows you to accommodate more cables in the same space. Safety above all: • ® cable tie does not injure the user. You have no risk of injury. The cable tie has no sharp edges, the cut part of the band being embedded in the head. • Your installations are protected.  BELTO® is firmly attached to the rope and does not rub against other ropes. It is perfectly suited for use in automation and moving machines. • Your cables are protected. The external notching of the belt does not damage the cables. • Halogen-free. A sturdiness to any test: • Once closed, the BELTO® cable tie does not open and has good tensile strength. You can insert a large number of cables into it. The BELTO® cable tie provides you with a secure, fixed hold. You can rely on it. Aesthetics in your installations: • The BELTO® cable tie, with its sophisticated profile, fits perfectly into your installation. It will be discreet and your installation will be clean and aesthetically pleasing. Quick installation! • BELTO® can be adapted and installed very quickly on any type of electrical installation. • It is very easy to insert the strip: inside the cable tie to save space and give an undeniable aesthetic result. • Effortless closing: the small opening on the head guides the band for a quick closing. • Optimal tightening: an optimal closure for a reliable, solid and fixed hold of the cables.

Brush Coatings with Different Brush Lengths for Versatile Applications. Our brush coatings with different brush lengths (2 mm, 6 mm, 13 mm, 15 mm) offer tailored solutions for a wide variety of bulk materials and their specific properties such as size, weight, and sensitivity. This flexible adaptability allows for the efficient conveying of even difficult-to-handle or delicate workpieces. Oily parts or those with special surface finishes can also be transported without difficulty, as the coating is specifically designed to ensure high conveying performance even under challenging conditions. Brush Coating Features: ✔ Performance Increase of up to 300%: The adapted brush density and length optimize the conveying process, significantly increasing efficiency. ✔ Noise Reduction: The specially developed structure of the brush surface significantly reduces conveying noise and contributes to a quieter working environment. ✔ Gentle Part Transport: The flexible bristle technology ensures gentle transport of delicate workpieces, which is particularly advantageous for sensitive or fragile parts. ✔ Versatile combinations with polyurethane and PU coatings Furthermore, combinations of brush coatings with polyurethane (PU) or PU coatings are possible to further optimize friction properties and abrasion resistance. These hybrid solutions offer additional advantages in specific applications, such as increased load-bearing capacity, improved adhesion, or chemical resistance.

Prägeservice für Ihre Anwendungen: • für rechteckige Markierungsschilder und Anhänger aus Metall mit einer Stärke von maximal 0,5 mm und einer Breite von mindestens 10 mm • hervorragend geeignet für Oberflächen, die mit Verunreinigungen oder Farbe in Berührung kommen können • „erhabene“ Großbuchstaben • alphanumerische und sequenzielle Nummerierung möglich • Anwendungsgebiete z. B. im Schiffbau, Bergbau, Petrochemie, Bahn-, Lebensmittel- und Pharmaindustrie

Im Bereich der Beschriftungssysteme bieten wir sowohl Lasermarkiersysteme, als auch Tintenstrahldrucker. So können eine Vielzahl von Ihren Beschriftungsanwendungen von uns gelöst werden. Dabei bieten Ihnen unsere Systeme viele Vorteile beim Beschriften Ihrer Produkte: - Beschriftungslaser: dieser Laser bietet Ihnen Qualität und Leistung für die Beschriftung von Kunststoff- und Metallobjekten. Aufgrund der automatischen Fokussierung im gesamten Beschriftungsfeld, der kamerabasierten Bilderfassung sowie der vorbeugenden Wartung ist der Beschriftungsvorgang nun noch benutzerfreundlicher - Tintenstrahldrucker: auch dieses Beschriftungssystem macht den Markierungsvorgang für den Anwender sehr einfach. Dafür sorgen die Selbstdiagnose mit automatischer Reinigungsfunktion, sowie die Add-on-Kamera zur Anpassung des Druckbildes. Kommen Sie gerne auf uns zu, wenn Sie eine Anwendung in diesem Bereich haben und wir beraten Sie gerne! Beschriftung, Produktkennzeichnung, Kennzeichnung, Codiersysteme, inkjet, Drucker, Laser, DMC, QR-Code, Aluminium, Kunstoff, Metall, Datum, MHD, UDI, Laserbeschriftung, Inkjetbeschriftung, Lasermarkierung

The Balluff Engineering Tool enables manufacturer-independent, centralized configuration and management of IO-Link networks. With automatic device discovery, simplified parameterization and port setting, backup and restore functions, and integrated testing and documentation capabilities, the Balluff Engineering Tool reduces complexity, saves valuable time during planning and commissioning, and minimizes downtime risks. This makes the use of IO-Link networks not only more efficient but also safer and more transparent. The Balluff Engineering Tool is used for commissioning, configuring, managing, testing, and documenting IO-Link topologies. It is available free of charge and compatible with all IO-Link devices conforming to the IO-Link standard, including all IO-Link network modules that are JSON-for-IO-Link compatible and the Balluff IO-Link USB module.

The BFN series fiber optic amplifiers are available in display high-performance/standard models and volume adjustable basic models for various environments. Fiber optic amplifiers feature stable detection with a fast response speed of up to 25 μs and a strong light intensity even for high-speed moving objects.

Mit unserem System „Bin-Picking-Modular“ erreichen wir größtmögliche Flexibilität und Produktivität für die roboter-automatisierte Bauteilvereinzelung mittels „Griff in die Kiste“. Dabei kombinieren wir hochleistungsfähige und zuverlässige Objekterkennungssysteme von Keyence. Wir setzen unser Know-How in der Robotik ein, um ein Höchstmaß an Bedienkomfort, Sicherheit und Performance zu garantieren. Der Integrierbarkeit unseres Systems „Bin-Picking-Modular“ in Ihre Anlagen und Prozesse sind dabei kaum Grenzen gesetzt.

binder is a global partner for perfect connections. The market leader in the field of circular connectors represents quality and is certified according to ISO 9001 and 14001. The extensive product portfolio in terms of circular connectors stretches across from miniature-connectors to 24-pole Machine-connectors. binder connectors are being primarily used in sensing, measuring and controlling as well as in automation in general. The binder Distributor Börsig is franchised partner of the manufacturer since 1969 and sells the premium products with a high level of expertise.

Wheel hub drive with fully integrated Circulo 9 Motion Controller from Synapticon - a compact, intelligent drive system with minimal integration expenses. Direct drive: Advantages in a nutshell - No gearbox – no wear - Much longer service life compared to conventional drive technology with a gear stage - Excellent running properties with barely perceptible noise level - Safer operation through permanent temperature monitoring - Ultra-compact with extremely high power density - Easy replacement of wheel coating on site possible thanks to patented Ketterer solution Overall System: Intelligent - Safe - Ultracompact - Optimum Performance Scaling: Available in all three Ketterer standard performance classes of the i-Wheel family on request - Highest performance in drive control in the smallest installation space - Easy to Use: Seamless Integration in a few easy steps - Plug & Play: Standard plug & standard cable can be used - High speed EtherCAT interface, low latency, negligible Jitter - Over 10 certified safety functions (SIL2, Pl-d), SIL3, Pl-e on request - High Resolution Absolute Encoder - User-friendly Synapticon parameterization and tuning software - Model predictive field-oriented control for high efficiency, maximum bandwidth - Optional emergency holding brake with energy saving mode - Available in the near future: Circulo 9 with Safe Motion Module

BLH & BLS Series – Compact 24 V Brushless DC Motors. Both series offer efficient 24 V brushless DC motors with feedback via integrated Hall sensors. They cover a wide power range and enable stable speed control even under load changes. The main differences lie in the functional depth of the respective drivers. The motors are available with various gearbox types, including helical and hollow-shaft flat gearboxes. BLH Series The motors cover 15–100 W and offer a speed range of 100–3000 rpm (or 80–3000 rpm for digital and RS-485 drivers). Three driver types are available: analog, digital, and RS-485 communication, each as a compact PCB driver. Supported functions (depending on model): - Torque limiting - Load factor display - Setting acceleration/deceleration ramps - Multiple programmable speed levels - Free MEXE02 parameterization software. BLS Series The BLS series offers 25–120 W of power at 100–2000 rpm or 100–4000 rpm, depending on the motor type. The drivers are available in two versions: - Simple type with particularly easy commissioning via an on/off signal - as an RS-485 variant with extended parameterization via MEXE02 software

Made for AGVs, mobile robots, rail systems, and retrofitting: BlitzFunk is the new real-time wireless network for OT. Reliable, secure, easy to integrate, no surprises. Providing guaranteed latency and data rate for everything mobile – without any interruptions thanks to true zero-latency roaming. Product data: https://fuenfeinhalb.de/en/products QoS & coverage calculator: https://fuenfeinhalb.de/en/calculator

Very large sealing ranges, highest density, very good strain relief and a unique marking - these are the features of the blueglobe. The core element of the blueglobe cable gland is the blue spherical sealing insert. Its innovative geometry achieves strain relief values that far exceed the normative requirements. With regard to protection against dust and water, PFLITSCH sets new standards with IP 68 up to 15 bar for a duration of one hour. In addition, the blueglobe cable gland passes the IP 69 water jet test. The moulded-on inlets extend the sealing ranges of a nominal size by 100 % in some cases. Three types (M16, M25 and M40) are sufficient to securely seal all cable diameters from 4 mm to 32 mm. Conventional cable glands require up to five sizes for this. When the pressure screw is tightened, the captive blueglobe sealing insert concentrates the sum of the forces optimally on the cable being fed through and encloses it over a large area. The optimised force distribution reliably prevents the notch effect that occurs with lamella systems. Damage to the cable sheath is impossible with the blueglobe sealing principle.

BlueLight sensors are true all-rounders that deliver the detection efficiency and process stability your critical application demands. Ideal for use in the automotive, plastics, packaging, and pharmaceuticals industries, these robust, reliable sensors provide an instantaneous response, regardless of the shape, colour, or structure of the object to be detected.

BLV‑R Series – AGV drive system The BLV‑R Series offers high-performance brushless DC motors with a driver, ideal for battery-powered and mobile automation systems. Perfect for AGVs, robotic transport, or compact conveyors requiring precise control, low noise, and efficient energy usage. Highlights • Power Ratings: 60 W, 100 W, 200 W, 400 W & 750 W • Operating Voltage: 24–48 VDC (750 W at 48 V only) • Speed Range: 1–4,000 rpm • Speed Regulation: ±0.01% (load variation) Position Detection: Built-in resolver with ±0.72° stopping accuracy (motor shaft) Mechanical Options Gear Variants: • Parallel shaft gearhead • Hollow-shaft flat gear • Round shaft (gearless) Torque Range: Up to 63 Nm nominal torque depending on configuration Electromagnetic Brake (optional): Ensures holding torque during power loss in vertical applications Functions & Interfaces ATL Function (Advanced Torque Limit): Automatically reduces torque to prevent shutdown under overload Sequence Control: Store up to 256 motion routines (loops, conditions, timers) directly in the controller Connectivity: RS-485 (Modbus RTU), CANopen; ID-Share for multi-axis coordination Typical Applications Ideal for mobile robots, AGVs, autonomous transport platforms, low-profile conveyor systems, and battery-powered motion control tasks where high torque and compact design are essential.

BMU & BLE2 Series – AC-powered Brushless DC Motors with a Shared Motor Lineup Both series use the same compact motor lineup (30–400 W, 80–4,000 rpm) with spur, flat, or planetary gearheads. H1 food-grade grease is available for spur gear types (30–120 W only). Motors are available with IP66 or IP67 protection, making them suitable for demanding environments. The key difference lies in the driver functionality. BMU Series Simple speed control via rotary push-dial on the driver, four fixed speeds programmable, with display for speed and load factor, and built-in protections. Plug-type motor cable enables quick, tool-free setup – ideal for straightforward applications. BLE2 Series Enhanced features: up to 16 programmable speeds, multiple control options (analog voltage, external potentiometer, digital inputs), torque limiting, and load-holding for vertical axes (with optional brake). Includes digital display on the driver. The stainless steel version of the BLE2 series features 200 W output power, an integrated hollow-shaft flat gearbox, and protection ratings of IP67/IP69K – ensuring maximum reliability even under the toughest conditions. Shared Features: Stable speed control under load changes (± 0.2 %) Compact, durable, low-maintenance motors Easy system integration via digital I/Os Available with IP66 or IP67 rating and optional H1 grease (spur gear, 30–120 W) Ideal for precise, compact drive systems in packaging, conveying, food-grade applications and more.