Exhibitor products

Precise measurement of acceleration, inclination and orientation. With the digital output, there is no need to connect an external ADC. This saves space and costs.

Precise measurement of acceleration, tilt, and orientation

In many production plants, manual production data acquisition (PDA) is often a time-consuming and error-prone process. There is often no clear and quick feedback on the quality of the products and the efficiency of the production lines. This leads to delays, increased scrap rates and difficulties in identifying and correcting errors in production. Production management and employees often struggle to identify problems in real time and make the necessary adjustments, which ultimately affects overall productivity and product quality. With Peakboard, you can overcome these issues and optimize your production processes with accurate, real-time data from your quality control. Our interactive application for manual production data acquisition (PDA) is an effective solution for your logistics or production. Employees in quality control can enter information on inspected items directly via a user-friendly touchscreen at the workstation or on a mobile tablet. After logging in, employees are taken directly to the overview. Here they can clock in, clock out and enter breaks. An overview of individual performance data is displayed on this screen, including machine running time and product comparison. In addition, the screen provides a clear overview of the current orders, which are processed one after the other. The reasons for rejects are recorded on the second screen. If an article is free of defects, this is confirmed by pressing the “OK” button. For items with quality problems, the defects can also be specified in detail. On the third screen, the application immediately shows you the quality of the items produced, both in real time and over a longer period of time. This information helps to quickly identify problems, such as a high number of defective parts, so that production processes can be optimized immediately.

EGE Metalldetektoren System 3000 erfassen zuverlässig Metallteile im Fördergut auf Transportbändern. Das System 3000 besteht aus einem Auswertegerät und einer kompakten Detektorspule. EGE-Metalldetektoren erkennen die schädlichen großen Metallteile und sind gleichzeitig unempfindlich gegenüber kleineren harmlosen metallischen Verunreinigungen des Fördergutes. Das System blendet statische Metallteile, wie sie etwa in der umgebenen Konstruktion verbaut sind, automatisch aus. Die Geräte sind klimawechselfest, wasserdicht und für den Einsatz im Freien konzipiert - etwa auf mobilen Anlagen. EGE-Metalldetektoren schützen zuverlässig Steinbrecher, Müllpressen, Mühlen und andere Verarbeitungswerke, die durch größere Metallteile beschädigt werden könnten.

The MG80 modules offer high speed processing (400µs) of all axis values and calculations. Depending on the communication protocol needed, the matching module can be chosen: 　 ●　Ethernet (TCP/TP) 1000BASE-TX: MG80-NE ●　EtherNET/IP: MG80-EI ●　PROFINET: MG80-PN ●　EtherCAT: MG80-EC ●　CC-Link: MG80-CL Possible linking of: ●　4 interface modules of MG80-NE ●　255 interface modules of MG80-EI/PN ●　65,535 interface modules of MG80-EC ●　21 interface modules of MG80-CL Further, up to 16 MG80-CM counter modules can be connected to each of the MG80 network interfaces. ●　Transmission speed of 100Mbit/s ●　Current value / MAX / MIN / P-P output ●　Easy mounting on 35mm DIN rail

●　Data transferring without PLC programming with PLC link ●　Compatible with PLC manufactured by Mitsubishi Electric, OMRON and Keyence ●　Up to 16 MG80-CM counter modules can be connected to MG80-SC ●　Current value / MAX / MIN / P-P output ●　Easy mounting on 35mm DIN rail

Designed to transport heavy automation equipment, MHD track roller system accommodates high offset and overhanging loads, and is ideally suited to be used as a 7th axis robot transfer. 7th axis robot transfer – MHD track roller system easily accommodates high offset and overhanging loads up to 136kN, making the system ideally suited to being used as a 7th axis transfer system for robots. Enhanced strength in downward direction – For larger robots with high emergency stop loads, a version using three taper roller bearings is available boosting strength in the downward direction. Hardwearing – Large wheels with axial capacity make the system tolerant of debris, misalignment, disturbance to joints and accidental damage. Low maintenance and durable – Sealed roller bearings are combined with hardened and precision ground flat tracks providing a reliable and low maintenance solution for heavy loads. Simplified installation – The lower bearing wheel of each block can be easily removed, allowing easy assembly onto the tracks by lowering the carriage from above.

mic+ Sensoren stehen in vier Gerätevarianten mit fünf unterschiedlichen Tastweiten zur Verfügung HIGHLIGHTS Digital-Display mit direkter Messwertausgabe in mm/cm oder % IO-Link-Schnittstelle > zur Unterstützung des neuen Industriestandards Numerische Einstellung des Sensors über Digital-Display > erlaubt die komplette Voreinstellung des Sensors Automatische Synchronisation und Multiplex-Betrieb UL gelistet > nach kanadischen und US-amerikanischen Sicherheitsstandards BASICS 1 Push-Pull-Schaltausgang 1 oder 2 Schaltausgänge Analogausgang 4–20 mA und 0–10 V für den gleichzeitigen Betrieb von bis zu zehn Sensoren auf engstem Raum mit automatischer Umschaltung zwischen Strom- und Spannungsausgang 5 Tastweiten mit einem Messbereich von 30 mm bis 8 m microsonic-Teach-in über Taster T1 oder T2 0,025 mm bis 2,4 mm Auflösung Temperaturkompensation  Betriebsspannung 9–30 V LinkControl zur Einstellung der Sensoren am PC

Current monitoring modularized to the maximum extent Mico Pro is the new and innovative current monitoring system from Murrelektronik. The modular system enables you to adapt systems precisely to suit specific applications – offering a favorable cost-benefit ratio while also being economical in their use of space. The patented tripping process assures optimum machine availability. Mico Pro monitors load and control currents and identifies critical moments. It signals limit loads and switches defective channels off in a targeted manner – according to the principle of “as late as possible, as early as necessary.” Mico Pro is a modular system for 12 and 24V DC operating voltages. Components can be selected for the particular application from numerous Mico Pro modules. You can select between modules with one, two or four output channels. The tripping currents are fixed (2, 4, 6, 8, 10 and 16 A) or can be flexibly adjusted from 1 to 10 A or from 11 to 20 A. Mico Pro has an integrated potential distribution concept for +24 (or +12) and 0V that significantly simplifies switch cabinet wiring. There are connection options for +24V and 0V on each channel. The innovate bridging system consisting of two bars and lateral spring contacts for connecting diagnostic and control signals is easy to handle. It is designed for a total current of up to 40A. All inputs and outputs of the system are provided with push-in spring clamp terminals. Great importance is attached to the diagnostic functions of Mico Pro. Each channel is equipped with an LED for status indication on the device and digital status signals can be transferred to the PLC. A channel-specific switching function via an PLC signal allows the Flex modules to switch system components on and off without any additional contactors, relays, or optocouplers. Not only short switching frequencies (of up to 10 Hz) but also longer frequencies can be realized. Mico Pro can be cascaded. This means: on a Mico channel, another Mico Pro station can be connected.

Small switch with large impact: The tactile switches of the MICON 5 family convince with an extraordinary tactile feedback. The integrated gold contacts guarantee reliable key operation. Thanks to the increased IP protection class, MICON 5 S (Sealed) tactile switches can be used on printed circuit boards that are made robust against environmental influences or contamination by using potting, dip coating or conformal coating. In combination with the extensive range of accessories, the MICON 5 becomes a universal solution for almost all applications. Various lengths, designs and variants with illumination options are available. - Special tactile feedback - SMT or THT version - Automatic assembly - Various actuation forces - Accessories range with plungers and key caps

Intelligent, compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 5.6 A (4ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (CZ-CAT) or CAN/CANopen (CZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm

Intelligent, ultra compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 4.2 A (3ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (MZ-CAT) or CAN/CANopen (MZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm

Üblicherweise werden SD-Karten in unkritischen Umgebungen, als Speicherkarte z.B. in Mobiltelefonen, Tablets sowie in Digitalkameras verwendet. Es gibt jedoch auch Anwendungen, besonders in rauhen Umgebungen, die wasser- und staubdichte Gehäuse zum Schutz der Elektronik vorsehen. Ein Speicherkartenwechsel setzt dabei in den meisten Fällen das Öffnen des Gehäuses voraus. Dabei ist die Elektronik, wenn auch nur kurzzeitig den Witterungsbedingungen ausgesetzt.