Exhibitor products

ST series safety sensors are suitable for the monitoring of protective devices on machines without inertia and allow the system in which they are used to reach a safety category up to SIL 3, PL e and Category 4. These sensors use RFID technology and provide high protection against any manipulation thanks to a unique code transmitted by the actuator. Since they have no mechanical elements, they guarantee a long service life even in applications with frequent operating cycles and under harsh environmental conditions. Their protection degree is rated IP67 and IP69K and they mantain the maximum safety level PL e, even when connecting up to 32 sensors in series. It is possible to choose among 3 kinds of actuators with different fixing and actuating directions. This means that the sensors can be installed on all types of machines and guards, both large and small.

Smart stainless steel assembly system (EMS) for frame structures in the food industry and in clean rooms Stainless steel is the material standard for installations in clean rooms, for filling, packaging and conveying systems in the food industry and for all areas which are at risk from corrosion. As a specialist for niche products for these fields, we have now developed stainless steel connection elements which can be used in conjunction with special clamping technology to assemble and disassemble frame structures made from square or round tubing in the common size 40 quickly, reliably and without the need for specialist knowledge

„Our new stainless steel profile enclosure combines high demands as to design, flexibility and functionality", says Wolfgang Zoll, sales manager of Georg Schlegel GmbH & Co. KG. The enclosure is based on a robust square profile made of 2VA stainless steel with a wall thickness of 2 mm and has been designed in a way that no screws are visible on the enclosure front side. The small-sized construction in a width of 40 mm exactly fits to each standard profile rail so that there is no overlapping and both - the enclosure and the profile rail - become a perfect unit. Besides, the stainless steel enclosure blends in harmoniously into different applications thanks to its reduced space saving height of only 40 mm. Also, relating to the mounting onto the profile rail the new solution scores: It just has to be put on and is being fixed by slot nuts with self-locking screws. In case a direct mounting to the wall is required, Schlegel also offers suitable solutions. For the equipment of the enclosure with 1 - 6 actuators customers can choose from the whole Shortron control unit range. The assembly is done by Schlegel in-house, upon delivery the stainless steel enclosure just has to be mounted to the profile rail. For the optimum adaption to individual requirements Schlegel is offering two connecting systems: For enclosures with 1 - 3 actuators via M12 connector and for those ones with 4 - 6 actuators with cable gland. The access to the enclosure is given via the bottom of the housing. Customised versions On request, Schlegel offers the new enclosure concept with customised equipment. Also in this case customer can choose from the whole Shortron control unit range. Beside the standard of up to 6 actuators it is also possible to get a versíon with more than 6 actuators, also in customised designs - up to a maximum length of 100 cm is possible. As an alternative, an additional enclosure concept with an extremely small size of 20 mm is planned.

Drives with the CM2H.. stainless steel servomotors have been specially designed for use in applications in the food industry, beverage production, and pharmaceutical industry. These are three industries with extremely high hygiene and cleanability requirements. Whether for aseptic filling systems for milk products or beverages, cutting machines for sausage or cheese, or filleting machines for fish or meat: SEW-EURODRIVE represents top-notch flexibility, longevity, and reliability. No edges and corners: Your solution for the highest hygiene standards Our stainless steel servo gearmotors from the PSH..CM2H.. series with a hygienic design meet the strict guidelines of the European Hygienic Engineering Design Group (EHEDG) and the U.S. Food and Drug Administration With a roughness below 0.8 µm and radii greater than 3 mm, the servo drives' housings have an exceptionally smooth surface and neither have rough edges nor any horizontal surfaces. Due to this high demand for longevity and easy cleanability, the compact units consisting of the synchronous servomotor and planetary gear unit are resistant against hot steam and corrosive cleaning agents As a result, they are perfectly suited for clean-in-place (CPI) and sterilization-in-place (SIP) processes. With the intention of making them quickly and easily cleanable, the stainless steel servo gearmotors were developed to withstand high-pressure cleaning, even at high temperatures and with chemical cleaning agents. The drives reach a degree of protection of IP69K.

Safe sensorless standstill monitoring The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down. In order to detect a standstill, the remanence voltage induced by the motor windings is evaluated and provides safe standstill monitoring up to Cat. 4 / PL e or SIL 3, even if the motor has already been switched off. Using a conventional release via a time control, dangerous movement could not necessarily be excluded. For the implementation of different operating modes, the standstill monitor UG 6946 also offers the possibility of bridging the standstill monitoring (muting). The simple integration into the machine and drive concept reduces the commissioning effort and costs and is particularly suitable for use in machine tools and woodworking machines, centrifuges and rolling drives. With a width of only 22.5 mm, the UG 6946 can be accommodated in the control panel even under tight space conditions allowing easy retrofitting. The device also offers two redundant safety contact paths and a forcibly guided signal contact.

Stepper motors as permanet magnet or hybrid stepper motors are essential for modern technologies. Their unique ability to rotate in fixed increments allows them to be used in a variety of applications. Stepper motors have a comparatively high torque as a direct drive and can be easily controlled. This precise control combined with its reliability and efficiency makes it the first choice in many high-tech applications. Advantages of our stepper motors: • Great powers • High starting torque as a direct drive • Precise positioning and repeatability of movement • High holding torque • Simple control • Compact, robust design • Long lifetime • Flexible customizable Our stepper motors are available in different motor designs and tailor-made adaptations • Single or double shaft • Motor length 1-4 or 5 stack • Protection class IP 40 - IP 67 • With plug or cable outlet • Winding and torque • Step angle • Lifetime • Mechanical interfaces

Redesign of the existing fire protection solution for control cabinet lines Development and production of a "mini version" including functional downgrade at lower production costs. - Development time including prototyping: 2 months - Series production since 2021 with approx. 150 pieces p.a.

Prototype construction and manufacture of a control unit and various HV cable sets for mobile test and diagnostic systems to assess the condition of medium-voltage cables with regard to weak points - Series production since 2015 with approx. 800 pieces p.a.

STOBER - the system supplier Everything from a single source

Stop Modul without damping for fast transport paths, short stopping times and high demands. Stops one or more moving workpiece carriers at the defined workpiece carrier stop plate in transfer systems (e.g. Bosch Rexroth TS2). The upper and lower position of the stop can be queried using inductive or electronic proximity switches. The lowering speed or the raising of the stop to the starting position can be adjusted by a throttle. Separation is therefore quiet. Available in pneumatic and electric versions.

Even though we are the specialist in stopping, we never stop – since our invention of the proven stopper in 1990 and the beginning of our success story, we have been constantly developing it further. The Stop Module – or also known as the separator – is characterized by its diversity: whether Stop Modules with damping or without damping, pneumatic or electric, our Stop Modules stop the workpiece with the highest precision for a wide variety of loads, speeds and conveying media. In a damped version, one or more workpiece carriers are stopped particularly gently and without vibration. The workpiece carrier is released for further transport by lowering the stop. Our variants are particularly in demand in the high-speed range and for roller conveyor systems that have a particularly slim design. Find separate product categories for these popular variants below. And as always with Asutec: All products are available in pneumatic and electrical versions.

Stop Module for roller conveyor system with a special design for roller conveyor systems. Through the particularly narrow design specially developed by ASUTEC, the stoppers for roller conveyor systems fit perfectly into the confined installation space between the rollers. The new concept developed by ASUTEC with extreme stability and high resistance to soiling of the stoppers, high conveying speeds and dynamic acceleration after the stopping process enable short cycle times. Available in pneumatic and electric versions.

Stop Module High-Speed especially for very high speeds and high workpiece loads. The decision is up to the user: higher masses can be transported at the same speed or higher speeds can be achieved with the same mass. The optimized damping system of the ASMHS* series therefore more than meets the requirements of fast, flexible production. Damping modules are used to dampen the impact of incoming workpiece carriers without vibration right up to the end position. They guarantee optimum position stability of the workpieces. The stop remains in the end position without counterforce, resulting in very precise positioning without additional indexing. The pneumatic damping can be infinitely adjusted to the workpiece pallet weight. Fastening options for proximity switches are available for inductive monitoring of whether a workpiece pallet is in contact with the stopper or has passed it. Available in pneumatic and electric versions.

Stop Modules with damping for fast, precise and gentle positioning of the workpiece carriers. Asutec Stop Modules cushion incoming workpiece carriers vibration-free up to the end position. They guarantee optimum position stability for the workpieces. The stop remains in the end position without counterforce. This means that workpiece carriers can be positioned very precisely without additional indexing. The pneumatic damping can be infinitely adjusted to the workpiece pallet weight.