Exhibitor products

The Hydrolevel® differential pressure transducers are designed to measure the differential pressure of gases or liquids. With its massive process connections, static pressures of up to 250 bar can be measured. Even small differential pressures are possible with high accuracy (measuring error of < 0.2%). The high overload capacity is also a big advantage.

The sensors from the Hydrolevel® HTS 500 series are compact sensors with a display, analog output and 2 switching outputs. They can be adjusted by the customer using 3 buttons on the sensor. Whether measuring range, unit, decimal point, or switching points, the sensor is parameterized with just a few settings. A Pt 100 class A serves as the measuring element. The sensor can be ordered with or without a process connection. The protective fitting (stainless steel 1.4571) can be made in different diameters. Furthermore, the HTS 580 is a variant available in which the protective fitting is separated from the sensor via a cable. Different cable materials are available for high temperature ranges. An optionally available wall bracket simplifies installation.

The LPK 121 series pressure transmitters are designed for continuous level measurement of liquids and gases. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. High-quality ceramic material, stainless steel 1.4404 various sealing materials (Viton as standard) guarantee resistance to almost all media. Thanks to the almost front-flush membrane, the sensors can also be used with heavily contaminated media.

The LPK 200 series pressure transmitters are designed for continuous level measurement of liquids and gases. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. High-quality ceramic material, stainless steel 1.4404 various sealing materials (Viton as standard) guarantee resistance to almost all media. Thanks to the almost front-flush membrane, the sensors can also be used with heavily contaminated media. Various options are available for process connection. Among other things, food-safe connections such as milk pipe or DRD are also available

The pressure transmitters of the Hydrolevel® LPK.V/SPK.V series are designed for continuous level measurement of liquids. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. A pure ceramic measuring cell, stainless steel 1.4404 and various types of seals guarantee resistance to almost all media. The measuring cell without oil filling ensures optimal temperature behavior and very high overload resistance as well as vacuum resistance. The devices are also suitable for use in hazardous areas.

The BLE radar is a compact, portable sensor for recording water levels in fresh, dirty and gray water. The measurement is carried out using radar. Thanks to the internal battery and data transfer to the data logger via Bluetooth Low Energy, the device works autonomously and therefore does not require any cabling at the installation site. The ultra-low power technology used enables a long battery life (up to 10 years) with a short measurement interval and high resolution. The data logger saves the measured values ​​and at the same time serves as a gateway to the web portal. The transmission takes place via LTE or NB1/NB2. The data logger automatically selects the network with the best reception.

The Hydrolevel® power supply and evaluation devices can be used universally! Sensor power, switching points, logging of data, output via interface, parameterization via the front keyboard or a PC, all of these functions are possible with the devices. 2 or 3 conductor sensors, active or passive, can be connected. The modular devices have up to 6 limit values, each with separately adjustable hysteresis. With functions such as pump swapping, fault relaying, window operation, interval operation or even quantity calculation, all imaginable tasks can be solved.

KES-GB-FDA Cable entry system The KES system consists of two components. The inner core made of polyamide PA 6.6 GF is crucial for stability and strain relief and is overmoulded with TPE in the sealing areas to ensure tightness according to protection class IP66. KES-GB-FDA is snapped onto the enclosure wall from the outside using the snap-in hooks and screwed through the enclosure wall from the inside using the integrated threaded bushings. The blue FDA-compliant TPE sealing material meets the requirements of food approval 1935/2004/EC and (EU) 10/2011.

The coordinated range of hygienic design solutions from PFLITSCH supports safe and reproducible production processes in the food and pharmaceutical industries. At the same time, it contributes to increased efficiency. For this purpose, the solutions for cable routing, cable feed-through and cable protection are designed for easy cleanability as well as process-safe, time and cost-saving installation.

In the food and beverage industry, strict hygiene standards and harsh operating conditions are essential to ensure product quality and consumer safety. The sensors used must be able to withstand a wide range of media, high temperatures and temperature fluctuations as well as frequent cleaning cycles, in order to ensure smooth operation and reliable processes. Discover the new SM Foodmag flow meter that has been specially developed for the food industry.

The room humidistat Hygroswitch is an on-off controller to control the relative air humidity. It is used to control air humidifying and dehumidifying in offices and computer rooms. Other areas of use are storage of foodstuffs and luxury foods, cooling rooms for fruit and vegetables, greenhouses for gardening use, the textile industry, the paper and printing industry, the film industry and hospitals In the case of the room humidistat Hygroswitch-i the external adjustment knob is replaced with an adjustment wheel with a scale inside the housing. The adjustment wheel needs to be aligned to the red mark.

i-series motec The new decentralized frequency inverter generation Next level: i650 expands the solution space​ i650 motec offers additional new functions compared to the i550 motec. With the Logic PLC, the decentralized frequency drive solves stand-alone applications of single or multiple drives. ​This integrated intelligence makes solutions independent of a higher-level control system possible. This saves hardware and integration costs, and the overall machine design remains clearer. ​ The integrated positioning function of the i650 is ideal for turntables, corner transfer conveyors and lifting stations. ​Safety is also enhanced with STO via CIP Safety in addition to STO.

Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO’s remote I/O system offers all the functions required for your automation needs – and for every fieldbus.

Decentralization with extended connectivity – the I/O System Field for IP67-rated cabinet-free automation features an impressive range of functions.